Overview
The DDKSIC PD100T is a Benchtop pH, dissolved oxygen meter with a 7-inch touch color screen that supports pH, mV (optional with ORP Electrode), DO and temperature measurement. The instrument features an intelligent Operating system including Electrode Management, Data Management, Automatic calibration, and more. It also provides power failure protection and factory reset.
Features
1. High-resolution 7-inch oversized touch color screen, beautiful, clear and easy to operate
2. Temperature unit optional: ° C/° F
3. Intelligent Operating system with Electrode Management, Data Management, Parameter Setting, Data Lock, Automatic calibration and other functions
4. PH module: calibrating point 1~ 5 point Automatic calibration, CH, USA, NIST calibrating solution optional, support pure water compensation and ammonia compensation mode
5. DO dissolve oxygen function: support temperature automatic compensation, air pressure automatic compensation, salinity manual compensation, support full oxygen calibration, zero oxygen calibration
6. With power failure protection and factory reset function
7. Data storage: 1000 sets
8. Continuous Measurement mode, Interval Timing Measurement mode can be set
9. Data locking function; Support Chinese and English Operating interface
10. Data printing: Support wireless Bluetooth connection to the printer to directly print measurement data (the printer is optional)
11. data output: U disk/PC/printer
12. Matching: Electrode Frame, Magnetic Stirrer, Standard Solution
13. Dustproof and waterproof grade: IP54
Principle
Electrode measurement of pH, dissolved oxygen and temperature parameters using automatic compensation technology to ensure measurement accuracy. pH measurement is based on electrochemistry principles, support multi-point and Automatic calibration; dissolved oxygen measurement combined with temperature, pressure and salinity compensation for accurate detection.
Applications
Water quality monitoring, laboratory analysis, environment testing, industrial process control
Standards
IP54 dustproof and waterproof standard
Steps
1. Connect the power supply and turn it on.
2. Measurement mode and parameter settings
3. Electrode calibrating (optional 1~ 5 point Automatic calibration)
4. Start measurement, data is automatically stored or locked
5. Optional printer for data printing
6. Export data using a USB stick or PC
Notice
• Electrode properly connected and calibrated
• Check the dustproof and waterproof level before use
• The data storage capacity is 1000 sets to avoid exceeding the limit
• The printer is Optional accessories and requires additional configuration
• Pay attention to the stability of the power supply during operation to avoid the impact of power failure