Overview
YIHENG BLF-7K Centrifuge is a laboratory professional instrument with a speed of 7000rpm and a relative centrifugal force of 2300g. It uses centrifugal force to accelerate the separation of different materials, adopts professional design concepts and manufacturing techniques, has a smooth and beautiful appearance, a compact and firm structure, and is ultra-quiet. It is suitable for microtubule filtrating and rapid centrifugation, effectively preventing the liquid wall hanging phenomenon in the centrifugal tube.
Features
1. Large centrifugal force: the maximum relative centrifugal force can reach 5000G;
2. Small vibration: Well-designed shock absorber devices provide minimal vibration during operation.
3. Ultra-quiet: using special motors, strong power, ultra-quiet, stable operation, noise is generally less than 50dB, and the maximum does not exceed 54dB;
4. Fast instantaneous acceleration: 90% of the maximum Rotation speed in 5 seconds;
5. Fast shutdown: Designed with two shutdown methods, free shutdown takes no more than 15 seconds, and open the lid and brake for only 3 seconds.
6. Small size, large capacity: larger than the market equivalent product capacity, can hold up to 2ml × 6;
7. Easy to replace the rotor: the design is ingenious, making it easy to replace the rotor without any tools.
Principle
BRF-7K Centrifuge uses centrifugal force to accelerate the separation of different materials that need to be separated, and realizes high-speed swirl/spin by directly driving the motor, thus completing the sample separation process.
Applications
Scientific research laboratory, microtubule filtrate, rapid centrifugation
Steps
1. Load the sample into the centrifuge tube and place it in the rotor.
2. Select automatic or constant speed mode to set Rotation speed;
3. Start the Centrifuge, and the acceleration time reaches 90% of the rated Rotation speed within 5 seconds;
4. After the operation is completed, choose the shutdown method: close the lid and stop freely for no more than 15 seconds, or open the lid and brake for only 3 seconds;
5. Remove the sample.
Notice
• Make sure the power supply is AC230V, 1A, 50/60Hz;
• Check whether the rotor is firmly installed before operation;
Noise level is generally less than 52dB (A), pay attention to the operating environment;
• Use a designated fuse (250v 0.5A);
• Choose the appropriate braking method according to your needs.