Measurement principle of resistance method, accuracy of +/- 1%, equipped with 610mm detachable long probe, can measure different depths of grain moisture, support voice broadcast and a variety of function settings, suitable for a variety of grain moisture detection.
The guide rail type is easy to operate, the positioning pin ensures accuracy, the pressing device reduces errors, the sampling thickness is less than 1.0mm, the parallelism is less than 0.1mm, and a variety of standard samples can be cut.
Conductivity Detector measurement principle, measurement range 0-80%, resolution 0.1%, Response Time 1 second, with temperature and humidity compensation and backlight display, easy to quickly detect on site.
Using temperature and humidity compensation technology to improve measurement accuracy, probe Sensor can penetrate deep into the material, Measurement range 0.8-80%, Response Time is only 1 second, with error fine-tuning and Interface customization function.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
Equipped with fixed K-type stainless steel penetration Probe, Response Time 20 seconds, IP65 waterproof standard, with CAL Check ™ calibrate inspection and battery error prevention system to ensure accurate and reliable measurement.
Using conductivity Measurement principle, can measure 0~ 80% moisture range, accuracy +/- (0.5% n + 1), with 240 data storage and USB/RS-232/Bluetooth communication function.
Using halogen lamp heating source, moisture temperature accuracy +/- 0.5%, moisture readability 0.02%~ 0.1%, heating temperature range 50 ℃ to 180 ℃, support timing automatic end measurement, with RS232 communication interface.
Using halogen lamp heating technology, fast drying samples and real-time display Moisture content, Moisture Precision up to +/- 0.2%, Heating Temperature range 80~ 160 ℃, suitable for a variety of sample detection.
Measurement range 0-80%, accuracy +/- (0.5% n + 0.5% n), support USB/RS-232/Bluetooth Data output method.
With split Probe design, equipped with F and N Probe, Measurement range 0~ 1500 microns, resolution 0.1 microns, automatic identification of substrate type, support for more than 60 readings per minute, Protection Rating IP65.
Using pyrolysis weight principle design, equipped with halogen heating unit, moisture readability of 0.02%, heating temperature up to 200 ℃, support automatic manual timing test, real-time display Moisture content change process.
Temperature and humidity compensation technology, measurement Precision +/- 0.5%, Response Time less than 1 second, with MAX Maximum hold and automatic shutdown function, optional single and double pin Sensor, easy to quickly detect on site.
Using high frequency principle, the measurement range is 0-80%, the accuracy is 0.1/0, and the Response Time is 1 second. The probe type Sensor can penetrate deep into the material. The portable design weighs about 200 grams, which is suitable for on-site rapid detection.
