High Accuracy Stepping Control system, support HR, HB, HV conversion scale, large test space, Built-in Printer and RS-232 interface, suitable for a variety of hardness of materials.
Compression stroke 2.50mm, load 237g, suitable for wet mold sand/core surface Hardness measurement, support USB and Bluetooth data output, with average calculation and undervoltage alarm function.
With three Adjustments, it can simultaneously measure Richter, Brinell, Rockwell and other Hardness values, indication Repeatability 6HLD, support 360 ° measurement direction, standard D-type Impact device and optional Miscellaneous type, anti-vibration Impact electromagnetic interference.
Manual measurement of film Hardness, test angle 45 °, load 1 +/- 0.05kg, three-point contact with the measured surface, suitable for inspection in any direction.
Manual measurement of paint film Hardness, load 500g, test angle 45 °, can be inspected in any direction, three points contact with the measured surface.
Manual measurement of paint film Hardness, load 1000g, test angle 45 °, three-point contact with the tested surface design, suitable for inspection in any direction.
The support ring contains 12 different models, covering the R10 to infinity surface range, suitable for inner and outer cylindrical and spherical surface measurement, ensuring the accuracy and Stability of surface hardness testing.
Support six kinds of Hardness standard conversion, equipped with high luminance LED backlight, metal shell anti-interference, standby time up to 100 hours, can store 600 sets of data, adapt to various harsh environments.
The device adopts D-type Impact device, supports 360 ° measurement, can display a variety of Hardness standards, has 600 sets of Data storage capacity, is small in size and weighs only 0.2kg, and has a standby time of 100 hours. It is suitable for small spaces and field environments.
The use of New material has a long life, stable fullness point and correction point, and can measure 0.6-8 mm thickness materials. Hardness value can be converted into Vickers, Rockwell and other standards.
The use of New material has a long life, stable fullness point and correction point, Hardness value can be converted into Vickers Rockwell Brinell, the range is 0-20HW, and the accuracy is 0.5HW, which is suitable for workpieces with a thickness of 0.6-13 mm.
Suitable for manual or mechanical low and medium pressure molding of fine sand core testing, compression stroke 2.50mm, load 980g, with average calculation and MAX Maximum latch function, support data output communication.
Using two-wheel and refill three-point contact design, refill and test surface to maintain an angle of 45 degrees, equipped with 750g weight load, by pushing the Tester can accurately determine the film Hardness value, easy and reliable operation.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
The Che design can be operated with one hand, the test range is equivalent to Brinell 25-135HB, and the measurement can be completed on one side without support. It has the function of extreme value retention and average calculation of 29 sets of data.
