Using one-piece casting process, strong and not easy to deform, maintaining test parallelism; Measurement range 0~ 4mm, resolution 0.01mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², in line with standard requirements.
Adopt High Accuracy modular Spreader station structure, all-electric control without external air source; Spreader thickness can reach a minimum of 0.01mm, accuracy +/- 0.003mm; equipped with UV LED curing module, instant curing; Spreader width 400mm, speed 2-4.5 m/min adjustable, forward and reverse stepless transmission.
The equipment adopts High Accuracy modular Spreader station, Spreader thickness range 0.01mm~ 2mm, coating speed 2~ 4.5m/min adjustable, with UV instant curing and heating function, suitable for a variety of materials such as paper, film and so on.
Coating speed 1~ 10m/min adjustable, wet film thickness range of 0.005-3mm, drying temperature up to 200 ℃, using continuous experimental film design, equipped with adjustable Blade Coating device and automatic deviation correction function.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
Adopt all-electric control without external air source, Spreader thickness range 0.01mm to 2mm, Spreader speed 2-4.5 m/min adjustable, with quick-release plastic groove and precision tension control, suitable for paper, film and other substrates.
Adopt High Accuracy modular Spreader station structure, all-electric control without external air source. The minimum thickness of Spreader can reach 0.01mm, the maximum Spreader width is 300mm, the Spreader speed is adjustable 2-4.5 m/min, and it has an electronically controlled precision tension system to adapt to different materials such as paper and plastic film.
Using a roll-to-roll continuous solution cell process, the substrate is crystallized or attached under specific conditions. Equipped with a 130 ° C hot air Oven drying system, the effective application width is 180mm, and the mechanical speed range is 0.1-300 mm/min. The solution cell has a lifting function and a separate heating design to ensure process Stability and operation safety.
Using scraping method to achieve 0.005-3mm wet film thickness, Spreader accuracy of +/- 5%, equipped with hot air circulation Oven and automatic constant tension control to ensure Spreader uniformity and Stability.
High Accuracy modular Spreader station structure, Spreader thickness range of 0.01mm~ 2mm, Spreader speed 2~ 4.5m/min adjustable, all-electric control without external air source, quick-release plastic tank easy to clean, suitable for a variety of materials and substrates.
Adopt High Accuracy Modular Spreader Station, all-electric control without external air source, Spreader thickness can reach a minimum of 0.01mm, maximum Spreader width of 300mm, and equipped with quick-release plastic slot for easy cleaning and maintenance.
Measurement accuracy of 0.01mm, measurement pressure of 20 +/- 0.5kpa, can maintain good parallelism, suitable for film thickness test below 20mm.
Aluminum die-casting ceramic coating working plate is resistant to abrasion and corrosion, the highest temperature is 350 ° C, the temperature control accuracy is +/- 0.2 ° C, the DC brushless motor runs smoothly with low noise, and the double heating control circuit ensures temperature stability.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
