Using PTFE lining acid and alkali resistance, the sealing effect is stable for a long time without leakage, the maximum pressure is 6Mpa, the maximum temperature is 240 ℃, and the small size is convenient for multiple Reaction Kettles to operate at the same time.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
Brushless DC motor with strong magnet, strong stirring force; Maximum stirring capacity of 3 liters, Speed range up to 1500 rpm; Corrosion resistant shell and stainless steel face to ensure long-term stable operation.
With average value calculation and MAX Maximum latch function, support a variety of data output methods, Measurement range 10HA~ 90HA, resolution 0.1H, suitable for soft plastic, sponge and other hardness of materials detection.
Dual pointer design can display the current value and peak value at the same time, the pressure at the end of the crimp is 445mN, and the measurement error is +/- 1HD, which is suitable for plastic sample condition adjustment testing.
ElectRode composite plastic shell design, no temperature compensation function, suitable for non-high temperature measurement, accurate and stable measurement, strong versatility.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
With 30 +/- 2mm amplitude and 2-3Hz vibration Frequency, it can simulate the long-term vibration environment of portable plastic bags, support 20KG load-bearing and 99999 counts, and meet the standard test requirements.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
Using plastic shell with 1 Meter BNC cable, specification Φ 12mm × 120mm, Measurement range 0-200.0mS/cm, no reference solution design to simplify operation, can work stably in different environments, accurately capture solution conductivity changes.
The equipment adopts a high-transparency Organic Glass test barrel and a special plastic bottle cap puncture fixture to ensure that the test process does not leak air. The pressure range is 0-400KPa, and the Measurement time can be freely set to 999 seconds. It has the function of sample library and Linear dispersion chart, and the data retention is intuitive.
Rotation speed is stable, Max. stirring Capacity 5L, stirring speed 60~ 2000rpm, strong magnetic steel stirring force, corrosion resistant engineering plastic shell.
The ABS engineering plastic structure is sturdy and corrosion resistant, with an accuracy of 0.1mg, four-level shock resistance and fully transparent Glass Draft Shield design, and supports piece counting and percentage weighing functions.
Color and tip shape can be customized to accurately test the surface tension of the material, suitable for a variety of printing processes and Plastic film materials.
Using mechanical measurement method, Measurement range 0~ 1mm, accuracy ≤ 0.005mm, Graduation 0.001mm, providing two probe pressure options to adapt to different testing needs.
