Set grinding, dispersion, stirring functions in one, using electronic speed line, digital display Rotation speed, Motor Power 400W, Lift Travel 200mm, suitable for a variety of experimental needs.
Equipment set stirring, sand grinding, dispersing multi-function in one, using dual-axis constant force automatic lifting system, lifting Travel 250mm, speed range 0-2800rpm, with small size, low noise, no carbon brush abrasion characteristics.
The surface of three rollers is extruded and rubbed at different speeds to achieve grinding. The diaMeter of the roller is 65mm, and the fineness of grinding can reach 15μm. It is suitable for fine grinding and dispersion of high viscosity materials.
Three rollers are used to squeeze each other and friction at different speeds to achieve grinding. The roller material is cold hard alloy cast iron, with surface Hardness HS70 ° or more, and the fineness of grinding can reach 15μm, which is suitable for high viscosity material processing.
Adopting three-roll extrusion friction grinding principle, Rotation speed 28-152rpm adjustable, fineness of grinding up to 15μm, Hardness HS70 ° above the surface of cold hard alloy steel roller, support water chilling down system, suitable for high viscosity material processing.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
Set stirring, dispersing, grinding three functions in one, motor Power 750W, processing viscosity of 100000mPa.s, using frequency control to achieve 60-8000rpm stepless speed regulation, through high-speed swirl/spin to pRoduce strong shear effect to achieve efficient mixing.
The equipment set stirring, sand grinding, dispersing functions in one, using Minbu motor to achieve 0-2800rpm speed regulation, lift Travel 250mm, with small size, low noise and no carbon brush abrasion characteristics.
Double Tank grinding design, vibration speed 60-1800rpm, discharge particle size up to 5~ 10μm, support dry grinding, wet grinding and low temperature grinding, suitable for heat sensitive materials and minimal liquid nitrogen consumption.
The surface of the three rollers is squeezed and rubbed at different speeds to achieve grinding. The roller is made of cold hard alloy steel, with a surface Hardness of HS70 ° or more, a fineness of grinding up to 15μm, and a capacity of 350Kg/h.
The double Tank design is used to achieve high-throughput grinding, the vibration speed is adjustable from 60 to 1800rpm, and the discharge particle size is 5 to 10 μm. It supports dry grinding, wet grinding and low temperature grinding, and effectively protects the molecular structure of heat-sensitive materials.
With double Tank grinding and 1-30Hz vibration Frequency adjustment, support low temperature grinding protection heat sensitive material, discharge particle size up to 5~ 10μm, can process more than 10 samples at a time and grinding time only 1-3 minutes.
Using large-screen touch screen operation, intelligent control of grinding time and speed, grinding results are highly repeatability. The dual-Tank design supports high-throughput processing, and the discharge particle size can reach 5~ 10 μm. It is suitable for heat-sensitive materials and consumes very little liquid nitrogen.
Using double Tank grinding design, vibration speed 60-1800rpm, discharge particle size up to 5~ 10μm, support low temperature grinding protection of heat sensitive materials, a processing of more than 10 samples, grinding time only 1-3 minutes.
Adopt frequency conversion motor to achieve stepless speed regulation of 60-8000rpm, equipped with dual-axis constant force lifting system and sand grinding blade disc, with digital display Rotation speed and timing function, lifting Travel up to 250mm.
