1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
Test accuracy is ensured by using 500g payload and carbide circular tool, built-in horizontal bubble, and 20 times Microscope can accurately measure the size of the Crowd, with a reading accuracy of 0.1mm.
High Accuracy Position Sensor, indentation accuracy of 0.01mm, the maximum can be measured 1.25mm thick plate, automatic zero after the test without cumulative error, with 10 times magnifying glass for easy observation.
High Accuracy Stepping Control system, support HR, HB, HV conversion scale, large test space, Built-in Printer and RS-232 interface, suitable for a variety of hardness of materials.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
According to the Richter Hardness Measurement principle, it can perform High Accuracy detection on all metal materials, support a variety of Hardness standard conversion, Measurement range HLD 170-960, can store 600 sets of data, equipped with true color screen and USB interface.
Impact energy 11mN, Impact device mass 80g, suitable for measurement of slender narrow groove, can meet the needs of different shapes and sizes of workpiece Hardness detection.
The integrated structure is compact and portable, and the dual-coil technology is used to ensure good Repeatability and Measurement accuracy. The built-in Direction Sensor automatically compensates for errors, and supports a variety of Hardness standard conversions.
Impact energy 11mJ, ball head diaMeter 3mm tungsten carbide material, can measure a variety of metal hardness of materials, Che diaMeter minimum 0.35mm, suitable for conventional Hardness testing needs.
Suitable for soft rubber, thermal plasticity resilience and extremely soft plastics, Hardness Measurement range < 20 HDO, with real-time, peak, timing and average Measurement mode, can be connected to the computer for data management and analysis.
Imported long-life Illuminant and narrowband filter system, Optical inspection stability ≤ 0.002A/20min, measurement range 0~ 200mg/L, support users to calibrate Linear dispersion and long-term data preservation.
Volume only 146 × 65 × 36mm, weight 130g, easy to use in a small space; support six kinds of hardness conversion, measurement range 200~ 900HLD, error +/- 0.8%, can store 50 sets of data.
Using 320 × 240 color screen display, measurement accuracy of +/- 0.5%, support full angle measurement, can store 10000 data, Built-in Printer is convenient for on-site output, to meet the needs of a variety of hardness of materials testing.
Manual measurement of paint film Hardness, load 500g, test angle 45 °, can be inspected in any direction, three points contact with the measured surface.
Measurement range 0-100HF, Indication Error ≤ +/- 1HF, compact and portable, suitable for the determination of soft foam hardness of materials.
