Film thickness 0.5mm, rounded edge design without burr, surface with anti-rust oil, suitable for coating adhesion, hardness, Impact and other performance testing experiments.
Film thickness 0.5mm, rounded edges without burr design, surface with anti-rust oil, suitable for adhesion, hardness, Impact and other paint performance testing experiments.
Film thickness 0.5mm fillet edge no burr design, with anti-rust oil to protect the surface, suitable for adhesion, hardness and other paint performance testing experiments, about 120 pieces per kilogram Encasement.
Adopting a pure oil-free lubrication piston system, the noise value is only 59dB, and it is equipped with a 60L anti-rust treatment gas storage Tank. The air pressure can be adjusted within the range of 5-8Bar, and it has multiple automatic protection functions.
Adopting a pure oil-free lubrication piston system, equipped with a 60L anti-rust and antibacterial gas storage Tank, with an exhaust capacity of 304L/min and a noise of only 60dB. It has multiple automatic protection functions and is easy to operate without the need for a special person to be on duty.
Tempered Glass platform, long-term use is not easy to abrasion and rust; the level of the working platform is adjustable, and the hardness Gauge is adjusted to the same level; the weight is accurate, the column lifting space is ≤ 140mm, Dimension 165 * 145 * 380mm.
Thickness 0.5mm fillet edge no burr design, surface with anti-rust oil to prevent oxidation, suitable for adhesion, Hardness, Impact and other coating performance test.
Adopt digital P.I.D. temperature control, upper and lower heat seal independent temperature control, heat sealing temperature range RT +~ 300 ℃, heat sealing pressure 0.05~ 0.7MPa, support manual and foot pedal start mode, anti-burn safety design.
The heat sealing paraMeters are tested by hot pressing sealing method, the temperature control accuracy is up to +/- 0.2 ℃, the heat sealing time is adjustable from 0.1 to 999.9s, and the upper and lower heat sealing heads are supported for independent temperature control and a variety of heat cover customization to ensure accurate and reliable test data.
Adopt 3 pump head piston structure, Power 2250W, gas storage Tank 90L. Pure oil-free design ensures clean gas, internal anti-rust treatment improves safety, ultra-quiet operation and low energy consumption, suitable for demanding application environments.
The equipment is equipped with an inlet and outlet device, which can pass inert gas to achieve anti-oxidation decarburization at a high temperature of 1000 ° C. Inner Chamber dimensions are 400 * 250 * 160mm, suitable for high temperature sintering and quenching and other heat treatment applications.
The heat sealing paraMeters are determined by hot pressing sealing method, the temperature control accuracy is +/- 0.1 ℃, the heat sealing temperature can reach 300 ℃, and the upper and lower heat sealing heads have independent temperature control and manual foot pedal dual start mode, which is safe and anti-scalding design.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
The rectangular vacuum Chamber improves space utilization, the stainless steel studio is durable and easy to clean, the Vacuum Level is 133Pa, the double-decked tempered Glass door is easy to observe, and the optional program control ensures the stoving conformity.
The heat sealing paraMeters were determined by hot-pressing sealing method, the temperature control accuracy was +/- 1 ℃, the heat sealing time was adjustable 0.1-999 s, the upper and lower heat heads were independently controlled, and the double-decked heat insulation design ensured the safety of use.
