Equipped with dual probes for simultaneous measurement of asperity and Coating thickness, Measurement range 3.4mm, minimum scale 1μm, support corrosion pit depth detection, in line with international standards such as ISO 2808.
Made of high-quality wear-resistant and corrosion-resistant alloy steel, the film Film thickness range is 250-4000 μm, and the flow of Coating in 2D state when the wet-film is placed horizontally can be measured.
Utilizing a wire-wound process, with a wet film thickness of 91.4 μm, a coating width of 300 mm, and durable stainless steel construction, the wire diaMeter of 1.02 mm ensures uniform coating, making it suitable for various surface treatments.
Complies with ISO 8502-3 standard, can assess the size and size of surface dust, ensure cleaning before lame plating, improve coating adhesion, suitable for passing test and long-term recording.
Using E Illuminant irradiation and 5 times reflection projection technology, Illuminant illuminance is not less than 1200X, measurement distinctness of image level from 0.1 to 2.0, suitable for detecting coating surface clarity.
The device can measure the ability of Coating to eliminate surface defects, wet film thickness range of 250~ 4000 μm, groove depth coverage of 250 to 4000 μm, in line with international standards.
Using a set of 3 designs can be prepared for 12 kinds of film thickness, wet film thickness range of 30-600μm, Moulding process Coating does not spill, suitable for a variety of substrate surface Spreader.
Measurement range 25~ 3000μm, step tooth design Division 25μm to 200μm, can be quickly placed vertically on the coating surface to measure the thickness immediately.
It is suitable for cylindrical surface measurement with a radius greater than 3mm, and can be equipped with extension Rods and transfer Rods to expand the range of use to ensure the accuracy and flexibility of surface asperity detection.
Coating can measure the relative leveling of liquid, evaluate the ability to eliminate surface defects, Coating thickness range of 250~ 400 μm, groove depth coverage of 100 to 1000 μm.
Made by extrusion process, the wet film thickness can be controlled at least 1.5μm, the groove bottom design is wider to achieve greater Coating Weight, and the chrome surface preparation improves durability.
The device can control the minimum 1.5μm wet film thickness, the bottom of the groove is wider, the Coating Weight is larger, and it is made of 304 stainless steel and chrome-plated surface, which is not easy to block and easy to clean.
Manufactured by extrusion process, the wet film thickness can be controlled to 1.5 μm, the bottom of the groove is wider to provide greater Coating Weight, and the chrome surface is durable and easy to clean, supporting ultra-thin Spreader applications.
Using extrusion process and chrome plating surface, the minimum wet film thickness can be controlled by 1.5 μ m, the bottom of the groove is wider and the Coating Weight is large, it is not easy to loosen and break the wire and is easy to clean.
It can accurately test the surface tension value of the material, support a variety of specifications bottle selection, the test range covers 30-60 dynes, suitable for Plastic film, metal foil and other materials surface tension detection.
