White part reflectance 80 +/- 2, non-Laminating design to enhance paint wettability, test area of 0.1 square Meters, Curl and checking resistance, suitable for brushing applications.
Adopt High Accuracy Modular Spreader Station, all-electric control without external air source, Spreader thickness can reach a minimum of 0.01mm, maximum Spreader width of 300mm, and equipped with quick-release plastic slot for easy cleaning and maintenance.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
The equipment adopts High Accuracy modular Spreader station, Spreader thickness range 0.01mm~ 2mm, coating speed 2~ 4.5m/min adjustable, with UV instant curing and heating function, suitable for a variety of materials such as paper, film and so on.
Adopt High Accuracy modular Spreader station structure, all-electric control without external air source. The minimum thickness of Spreader can reach 0.01mm, the maximum Spreader width is 300mm, the Spreader speed is adjustable 2-4.5 m/min, and it has an electronically controlled precision tension system to adapt to different materials such as paper and plastic film.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Adopt all-electric control without external air source, Spreader thickness range 0.01mm to 2mm, Spreader speed 2-4.5 m/min adjustable, with quick-release plastic groove and precision tension control, suitable for paper, film and other substrates.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Spreader accuracy +/- 0.003mm, Spreader thickness range 0.001~ 10mm adjustable, with Vacuum chuck and heating function, support bar and drawdown blade two coating methods to ensure Spreader uniformity and repRoducibility.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
The tapered shaft size range is 3.2~ 38mm, and the shaft length is 203mm, which can test the cracking and disbonding performance of the paint film under bending conditions, in line with international standards.
