Using oil-free vacuum pump to achieve pollution-free work, with three-speed Vacuum Level conversion and 0.01s high resolution, intelligent pneumatic pressure to ensure Test accuracy and efficiency.
Adopt oil pump forced oil inlet device, can operate continuously under 1.33 × 10 ³ Pa intake pressure, gas distribution ballast to prevent pump oil mixing, pumping speed 2L/S, Ultimate vacuum degree up to 0.006mbar, support a variety of interface conversion.
Adopt oil-free vacuum pump to achieve pollution-free measurement, equipped with automatic switching function of large and small volume chambers, the test range covers 0-9999 seconds, supports automatic calculation of front and back smoothness, and the sealing meets the requirements of national standards.
Using electromagnetic motor and diaphragm sealing Chamber, Vacuum Level up to 0.08Mpa, pumping rate 60L/min, non-oil pump design pollution-free, full Teflon material resistant to strong acid and alkali corrosion, free of daily maintenance.
The pumping rate is up to 30L/min, the ultimate pressure is > 0.08Mpa, the oil-free design and PTFE diaphragm material are used, the noise is lower than 50dB, and it can operate continuously for 24 hours with simple maintenance.
The integrated pump body structure is adopted, and the oil pump is forced to lubricate and control. The ultimate pressure is as low as 0.005mbar, the noise is only 58dB, and the parts are few and easy to maintain.
The pumping speed is up to 30L/min, the ultimate pressure is > 0.085Mpa, and the imported corrosion-resistant rubber diaphragm is adopted. The oil-free design avoids pollution, and the noise is lower than 50dB. It can work continuously and stably for 24 hours.
The integrated pump body structure is adopted, and the forced oil pump lubrication system ensures stable operation. The ultimate pressure is as low as 0.005mbar, the noise is only 58dB, and the parts are few and easy to maintain.
Adopt rotary vane structure design, pumping rate up to 2L/s, Ultimate vacuum degree 6x10 ^ -2Pa, equipped with Φ 25mm standard interface, support long-term continuous operation, especially suitable for vibration and noise sensitive experimental environment.
The pumping speed is 60L/min, the ultimate pressure is > 0.085Mpa, the positive and negative pressure is dual-use, the oil-free operation, the noise is lower than 50dB, it can work continuously for 24 hours, and the maintenance is simple.
With an oil-free piston design that requires no maintenance, the maximum Vacuum Level is -680mmHg and adjustable, with overflow protection and low noise 50dB operation, making it suitable for precision coating applications.
Adopt 3 pump head piston structure, Power 2250W, gas storage Tank 90L. Pure oil-free design ensures clean gas, internal anti-rust treatment improves safety, ultra-quiet operation and low energy consumption, suitable for demanding application environments.
It adopts an oil pump forced oil inlet device to operate continuously under low intake pressure; it is equipped with a special gas ballast valve to prevent pump oil from mixing water; the pumping efficiency is up to 8L/S, Ultimate vacuum degree ≤ 5 × 10 ^ Pa; it is equipped with an automatic anti-return oil check valve and supports a variety of interface configurations.
Using electromagnetic motor and diaphragm sealing Chamber, maximum Vacuum Level 0.08Mpa, full Teflon material resistant to strong chemical corrosion, free of daily maintenance and long service life.
Using electromagnetic motor and diaphragm sealing Chamber, the maximum Vacuum Level is 0.08Mpa, full Teflon material is resistant to strong chemical corrosion, free of daily maintenance and long service life, suitable for positive and negative pressure dual-use scenarios.
