Pure oil-free design ensures clean gas, exhaust volume of 1500L/min, automatic start and stop to reduce energy consumption, pressure dew point 2-10 ℃, suitable for a variety of industry needs.
Adopt pure oil-free design to ensure clean gas, dew point range -40~ -60 ℃, exhaust volume 600L/min, automatic start and stop to reduce energy consumption, no need for special personnel on duty and easy maintenance.
Using oil Bath heating medium, Temperature range from room temperature to 200 ℃, temperature control accuracy +/- 0.5 ℃, equipped with sample clamping grid to ensure temperature stability, suitable for various film thermal cissing rate tests.
Using silicone oil heating technology, the cold trap temperature can reach -80 ℃, Ultimate vacuum degree ≤ 2Pa, with sample pre-freezing function and color Touchscreen operation, support a variety of container freeze-drying needs.
Using silicone oil heating technology, the cold trap temperature can reach -80 ° C, Ultimate vacuum degree ≤ 2Pa, equipped with 7-inch Touchscreen and pre-freezing function, support data export and remote control, suitable for a variety of container lyophilization needs.
The exhaust volume reaches 758L/min, the noise is only 55dB, the pure oil-free design and automatic start-stop function are adopted, and the matching dryer can realize -20 to -60 dew points, which is easy to operate and easy to maintain.
With 260 * 200 thermal imagery resolution and 70mK thermal Sensitivity, it can quickly locate the abnormal temperature rise point of the circuit board, support -10~ 120 ℃ temperature measurement range, equipped with adjustable lens and multi-directional adjustment bracket, easy to accurately observe the thermal distribution of the circuit board.
The pure oil-free design ensures that the gas is clean and pollution-free, the exhaust volume reaches 608L/min to meet the high-efficiency gas supply demand, the noise control is about 45 decibels to achieve ultra-quiet operation, the automatic operation does not require special personnel to be on duty, and the optional dew point of the dryer is supported as low as -60.
With cold trap temperature ≤ -80 ℃ and water capture 4kg/batch, using silicone oil heating technology, support sample pre-freezing and one-button defrosting function, color Touchscreen operation is simple, data can be exported and saved.
The integrated adsorption structure is used with a silent oil-free air Compressor, which can reduce the dewpoint temperature by 20~ 40 ° C, has the function of drying and sterilization, and the water outlet effect is stable and reliable.
Adopt two-box mobile structure, air pressure drive test object Impact, Thermal Shock mechanism moving time within 10 seconds, temperature recovery time within 5 minutes, in line with MIL and other international test standards.
Using two-box mobile Impact structure, Thermal Shock mechanism moves within 10 seconds, temperature recovery time ≤ 5 minutes, equipped with rigid polyurethane foam insulation material, effective energy saving and waterproof and moisture proof.
Support thermal deformation and Vicat softening point test, Temperature range up to 300 ℃, Temperature control accuracy +/- 0.5 ℃, mechanical mixing and large capacity Tank to ensure uniform insulation field, double control mode operation flexibility.
The transient planar heat source method is used, the test time is not more than 160 seconds, the Sensitivity is 0.00001, and the thermal conductivity of 0.0001 to 50W/(m * K) can be measured. It supports a variety of morphological samples and meets international standards.
Ten grid design can monitor the range of 40-249 ℃, using irreversible discoloration technology to accurately record the highest temperature experienced, waterproof and oil-proof material to ensure normal use in harsh environments.
