Frequency range 20KHz to 100KHz, Sensitivity indicated by LED and sound, weight of only 140 grams for portable, suitable for a variety of gas and air leak detection scenarios.
Using 40KHz Frequency and 640KHz crystal time base circuit, the weight is only 50 grams and easy to carry, which can accurately detect air leakage sources in various environments.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Formed design Coating Weight is about twice the wide-wound drawdown bar, wet film thickness 13μm, film accuracy of 0.5 micron, 304 stainless steel material to ensure durability.
Using a wire-wound coating process, with a wet film thickness of 32.0 μm and a coating width of 300 mm, it is suitable for substrates prone to curling and convexity, enabling uniform wet film coating, with a wire diaMeter of 0.36 mm.
Adopt clamshell type Blade Coating head design, easy to clean; coating speed 1~ 300mm/s stepless speed regulation, Spreader accuracy up to +/- 0.003mm, to meet the laboratory High Accuracy film needs.
Spreader 13 micron wet film thickness, application width up to 300mm, 304 stainless steel for durability and precise coating control.
The formed pRoduction process ensures uniform film, provides 47 micron accurate wet film thickness, 304 stainless steel material is durable and easy to clean, suitable for a variety of Coating sample prepative.
Wound wire design, wet film thickness 125.7 microns, coating width 300 mm, stainless steel material ensures durability and precise coating effect.
Wet film thickness 29.7 microMeters, coating width 300 milliMeters, using stainless steel wire-winding process, suitable for experimental sample preparation.
The device adopts destructive measurement, resolution +/- 0.001mm, can carry out V-shaped incision, grid cutting and Cedar test, directly observe Coating thickness and Cedar length, support multi-layer film analysis.
304 stainless steel material, wet film thickness 8 μ m, application width 300mm, formed pRoduction process to ensure uniform coating and continuous wire.
The formed pRoduction process is adopted, the wet film thickness is 42 μm, the application width is 60mm, the preparatory coating is uniform and the film thickness is accurately controllable, which is convenient for comparative analysis by conversion of dry-film thickness by Solid content.
Wet film thickness 50μm, total length 700mm, effective application width 600mm, support custom Coating Weight and surface preparation, to meet the needs of different substrate uniform Spreader.
Utilizing a wire-wound process, the wet film thickness is 11.4 μm, with a diaMeter of 9.5 mm and a coating width of 300 mm. The stainless steel material ensures durability and precise coating results.
