Using double-sided uniform tin plating process, the surface mass reaches class I, Hardness is T52, standard thickness is 0.28mm, to ensure accurate and reliable film test results.
Using 2000g +/- 5g roller load and 300mm/min rolling speed to ensure that the adhesive tape sample is flat and evenly adhered to the standard substrate, in line with CNS-11888 and PSTC-8 design standards.
With a 5/10 station design and room temperature range, multiple samples can be tested simultaneously, and the adhesion and durability performance can be accurately evaluated through the suspension weight measurement of the displacement or complete disengagement time.
Using silicon carbide Rod double-sided heating, rapid heating and high thermal efficiency; maximum temperature 1200 ℃, temperature control accuracy +/- 5% ℃; PID microcomputer control combined with K-type Thermocouple, temperature accuracy and stability.
Equipped with 10-station synchronous test capability, 1000g weight and 1-999999 minute Timer, using SUS #304 steel plate to ensure test accuracy, and automatically recording tape peeling time.
With 5 groups of independent testing capabilities, the temperature control range is from room temperature to 70 ° C, and the hot air circulation method is used to ensure Temperature uniformity.
The double-sided design can provide two wet film thicknesses of 38μm and 76μm, the effective Spreader width is 12.7mm, and the alloy steel material is wear-resistant and corrosion-resistant to ensure coating conformity and Repeatability.
Made of wear-resistant and corrosion-resistant alloy steel, the double-sided design provides two film Film thicknesses of 70 and 100 μm, and the Spreader width is 80mm, which is suitable for experimental film preparation of various materials.
Using CR12 molybdenum vanadium material double edge structure, film thickness 500μm/600μm, U-shaped design to achieve fast Spreader, effective application width 80mm, total length 100mm, suitable for wet-film preparatory.
Measured value 500N, suitable for tape, PCB, adhesive tape and other materials disbonding force test, supporting the Force Gauge test bench.
10 station design can carry out multiple sets of tests at the same time. Temperature range RT +~ 250 ℃, hot air circulation to ensure uniform temperature. With over-temperature and electric overload automatic power-off protection, improve operation safety.
Double-sided design can provide 75/150μm two kinds of wet film thickness, effective Spreader width 12.7mm, wear-resistant corrosion-resistant alloy steel material to ensure accurate control of film Film thickness, to ensure coating conformity and Repeatability.
Double-sided different film Film thickness design, wet film thickness 150/200μm, Spreader width 80mm, wear-resistant corrosion-resistant alloy steel material, suitable for a variety of materials experimental film preparatory.
Tack testing to assess adhesion by measurement of displacement or peeling time under specified weight. With thermostatic test chamber, multi-national standards are supported and the operation process is clear.
The adhesive force of the tape is 4.3N/cm, and the principle of cross-cut method is adopted, which is suitable for adhesion testing. The performance is stable and non-degumming, and the test results are accurate and reliable.
