The instrument can measure the performance of paper or Cardboard absorbing inks in the specified time and area, the ink wiping speed is 15 +/- 0.5cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the 4.3-inch color Touchscreen is used.
With 60 ° Measurement Angles and 10 * 10mm Measuring Area, it supports 60 + readings per minute. Automatic calibration and IP65 Protection Rating ensure stability and durability.
No need to preheat the test, 1.5 seconds results; 21mm measurement diaMeter with open area, support any size sample; LED Illuminant life up to 10 years, to ensure long-term stable measurement.
Adopt stamping sampling method, equipped with special 18 steel knife edge more durable, sampling area of 100cm ², sample thickness range of 0.1-1 mm, suitable for standard sample preparation.
Using a large-area silicon photodiode array sensor, Repeatability Delta E * ab is controlled within 0.02, equipped with 5 measurement diaMeters to adapt to different samples, and supports fluorescence sample measurement.
Measuring Area size 1.5x2mm, Repeatability +/- 0.1GU, equipped with 3.5-inch color Touchscreen, supports four Measurement modes to meet different measurement needs.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
Measure the surface of paint film and putty film and the actual drying time, in line with GB/T1728 standard, the weight of the Tester is 200g, and the weight of the bottom area is 1cm ².
Under the pressure difference of 1Kpa, the time required for the measurement of water through the 10cm ² sample area is suitable for hydrophilic filtrating materials with certain wet strength, automatic timing, and convenient operation.
The sampling area is 100cm ², the sampling thickness range is 0.1-1 mm, and the sampling error is +/- 0.35cm ². It is suitable for paper Basis Weight determination and sheet burst resistance test standard sample sampling.
Equipped with 20W fluorescent lamp and 60 ° illumination angle, the effective area of the table is 0.0625 square Meters and can be 360 ° swirl/spin, supporting 0.05~ 5.0mm ² standard dust map detection, convenient and accurate operation.
Can cut 100cm ² standard area sample, sampling error +/- 0.35cm ², suitable for a variety of sheet material sampling, thickness range 0.1-5 mm, Operating temperature 20 +/- 10 ℃.
The sampling area is 100cm ², the error is controlled within +/- 0.35cm ², and the material with 0.1-0 thickness can be processed. Special design is used to ensure accurate and fast sampling.
Measurement range 0-4mm, contact pressure 100 +/- 10kPa, contact area 200 +/- 5mm ², measurement plane parallelism ≤ 0.0005mm, suitable for a variety of sheet material thickness accurate determination.
Vertical design with quasi-closed Glass damper, adjustable air volume system to maintain 0.3~ 0.6m/s wind speed, stainless steel experimental area and 2KW socket easy to operate, clean level of 100.
