The instrument uses 241 +/- 6mm tire uniform rolling detection, wet film thickness 200um +/- 20um, every 30 seconds, repeability test, accurate determination of non-stick tire drying time, suitable for marking Coating quality control.
The tire size of the instrument is Φ 241 +/- 6mm, weight 15.8 +/- 0.2kg, dedicated to marking Coating drying time test, easy to operate, accurate and reliable results.
Made of stainless steel, the range is 10~ 100μm, Division 10μm, Dimension 65 * 36 * 1.5mm, suitable for Paints, varnish and other Coating Coating thickness measurement.
Equipped with 18 standard color scale solution, prepared according to GB/T1722-92 standard, using an inner diaMeter of 10.75mm Glass testtube, Color comparison is carried out in the Color Assessment Cabinet to ensure accurate measurement results.
The instrument is designed with a heavy hammer structure, with a weight mass of 6600g +/- 33g, which is suitable for the bending performance test of reflective film. It is simple to operate and safe and reliable to measure, and meets the requirements of national standards.
Polygonal structure design, range 25~ 2032µm, in line with GB/T1764-79, GB/T134522-92, ISO 2808-74 standards, suitable for Paints, varnish and other Coating wet film thickness measurement.
Made of stainless steel, acid and alkali erosion resistance; 4-sided design can provide 30/60/90/120μm four film thickness, application width 80mm, operation only need to change the angle to quickly switch film thickness.
The stainless steel material is resistant to acid and alkali erosion, and can scrape 250-1000 μm of four different thickness wet-film. During operation, only the angle can be changed to obtain different film thicknesses, and the application width is 80mm.
Hard stainless steel material corrosion resistance, single appliance provides 25/50/75/100μm four fixed film thickness, application width 80mm, swirl/spin switching thickness, easy to operate.
6-Channel design supports multi-directional temperature monitoring, can work for 60 minutes in a 500 ° C environment, using nano-aerospace environmentally friendly heat insulation materials, K-type Thermocouple ensures +/- 0.3 ° C High Accuracy measurement, effectively solving color difference and curing problems.
The 4-sided design can provide four different film thicknesses, the application width is 160mm, and the hard stainless steel material is resistant to corrosion.
The aluminum alloy material ensures durability, the volume of 100ml meets the standard measurement requirements, and the 0.1 ℃ indexing thermoMeter can achieve accurate density determination, suitable for laboratory environment.
The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
The use of national standard 06Cr19Ni10 stainless steel precision machining, high temperature resistance up to 300 ℃, low temperature resistance to -100 ℃, hardness ≤ 187HB, with acid and alkali resistance, grinding anti-sinking, anti-stick, suitable for dry grinding and wet grinding.
The device can quantify the liquid transparency level, the wavelength range is 340-1000nm, the transmittance accuracy is +/- 1%, the operation is simple and convenient, and it is suitable for detecting impurities and turbidity.
