CATEGORIES

    Lamination Dyne Pen

    Overview Products Knowledge Standards Terms
    The laminating dyne pen applies specific surface tension test liquid through its tip, and observes the contraction or spreading state of the liquid to determine the surface tension of the substrate. It is used to detect the surface treatment effects of materials such as plastic films and metal foils, and to guide the adhesion control in processes like printing, coating, and laminating.
    Selection
    Select the pen model based on the common surface tension range of the material to be tested, considering the substrate type and process requirements. Clean the surface before testing, and start with a pen type that is 2-3 mN/m lower than the estimated tension. Precisely determine the critical value through a series of pen types. Pay attention to environmental temperature, humidity, and the expiration date of the pen liquid.

    Terms

    Dyne Pens for Printing
    Surface Energy Dyne Pen
    Interlayer Bond Strength Tester
    Interlayer bond strength
    Peel Strength Tester
    Dyne pen

    Standards

    Active GB/T 35457-2017
    Resilient,textile and laminate floor coverings—Test method for volatile organic compound(VOC)emissions
    Active GB/T 26390-2011
    Wear-resisting paper for laminate floor covering

    Instruments

    Arcotest 48 #Dyne pen tip +/- 0.5 dyne accuracy
    Arcotest 48 #Dyne pen tip +/- 0.5 dyne accuracy

    Fiber wear-resistant pen tip design to ensure smooth and durable ink, accuracy of +/- 0.5 dyne, can quickly detect a variety of materials Surface Energy, sealing pen cap extended shelf life.

    $ 99.00
    Arcotest 46 #Dyne pen surface tension test pen, wear resistant pen tip +/- 0.5 dyne
    Arcotest 46 #Dyne pen surface tension test pen, wear resistant pen tip +/- 0.5 dyne

    Fiber wear-resistant pen design, Test accuracy of +/- 0.5 dyne, 15ML large capacity can be tested multiple times, 2-4 seconds to quickly obtain results, suitable for a variety of materials Surface Energy testing.

    $ 99.00
    Arcotest 60 #Dyne pen head 15ML large capacity +/- 0.5 dyne accuracy
    Arcotest 60 #Dyne pen head 15ML large capacity +/- 0.5 dyne accuracy

    Using fiber wear-resistant pen design, width 5mm, Test accuracy +/- 0.5 dyne, ink smooth and detection only 4 seconds, suitable for a variety of materials surface tension test.

    $ 99.00
    ARCOTest 40 #Dyne pen 15ML large capacity
    ARCOTest 40 #Dyne pen 15ML large capacity

    The fiber wear-resistant pen tip is not easy to deform, and the writing is smooth; it can be accurate to +/- 0.5 dyne, and the test is accurate; 15ML large capacity, long shelf life; 38 dyne models are complete to meet various needs.

    $ 99.00
    ARCOTest 34 #Dyne pen surface tension test pen, fiber wear resistant pen tip +/- 0.5 dyne accuracy
    ARCOTest 34 #Dyne pen surface tension test pen, fiber wear resistant pen tip +/- 0.5 dyne accuracy

    Using fiber wear-resistant pen design, the accuracy can reach +/- 0.5 dyne, the results can be displayed 2-4 seconds after the test, equipped with 15ml large-capacity ink, support 28-70 kinds of tension value test requirements.

    $ 99.00
    SHEELON 46 #Dyne pen surface tension test pen, corona treatment pen Dyne Level inspection tool
    SHEELON 46 #Dyne pen surface tension test pen, corona treatment pen Dyne Level inspection tool

    The test results are fast without waiting, the full sealing pen cover has a long environmental protection life, is small in size and easy to carry, can accurately test the surface force Dyne Level, and the writing width is 7mm and the capacity is 7ml.

    $ 89.00
    SHEELON 28 #Dyne pen surface tension test pen, corona treatment pen
    SHEELON 28 #Dyne pen surface tension test pen, corona treatment pen

    Test results are fast, a wipe is available; full sealing pen design, long life and environmental protection; compact and portable, easy to disassemble and install; accurate test, can accurately determine the surface tension Dyne Level.

    $ 89.00
    SHEELON 48 #Dyne pen surface tension test pen, corona treatment pen
    SHEELON 48 #Dyne pen surface tension test pen, corona treatment pen

    The test results are fast without waiting, the full sealing pen cover has a long environmental protection life, is small in size and easy to carry, can accurately test the surface tension Dyne Level, and the writing width is 7mm and the capacity is 7ml.

    $ 89.00
    Arcotest 28 #Dyne pen head 15ML large capacity +/- 0.5 accuracy
    Arcotest 28 #Dyne pen head 15ML large capacity +/- 0.5 accuracy

    Adopt fiber wear-resistant pen head design, ink smooth and not easy to deform, Test accuracy of +/- 0.5, provide 38 dyne models to choose from, sealing pen cap to prevent volatilization, long service life and easy operation.

    $ 99.00
    Arcotest 42 #Dyne pen head 15ML large capacity +/- 0.5 dyne accuracy
    Arcotest 42 #Dyne pen head 15ML large capacity +/- 0.5 dyne accuracy

    Using fiber wear-resistant pen tip, ink smooth and not easy to deform, Test accuracy of +/- 0.5 dyne, 2-4 seconds after drawing the line to observe the results, suitable for a variety of substrates Surface Energy detection.

    $ 99.00
    ARCOTest 36 #Dyne pen head 15ML large capacity +/- 0.5 dyne accuracy
    ARCOTest 36 #Dyne pen head 15ML large capacity +/- 0.5 dyne accuracy

    The use of fiber wear-resistant pen to ensure smooth testing, Accuracy of +/- 0.5 dyne, 2-4 seconds after line film formation quickly display results, bright colors easy to observe details.

    $ 99.00
    SHEELON 60 #Dyne pen surface tension test pen, corona treatment pen 7ml capacity
    SHEELON 60 #Dyne pen surface tension test pen, corona treatment pen 7ml capacity

    No need to wait for a wipe to get the result, full sealing pen cover to ensure environmental protection and long life, 7ml capacity design portable and practical, can accurately test the surface tension Dyne Level, suitable for a variety of material detection.

    $ 89.00
    Arcotest 30 #Dyne pen Film Metallic Plastic Ceramic Dyne Test Tool
    Arcotest 30 #Dyne pen Film Metallic Plastic Ceramic Dyne Test Tool

    The fiber wear-resistant pen tip is used to ensure smooth ink output, the 15ml large-capacity design supports long-term use, and the Accuracy is up to +/- 0.5 dyne. A total of 38 models from 28 to 70 are provided to meet various testing needs, and the operation is simple and fast.

    $ 99.00
    Arcotest 44 #Dyne pen surface tension test pen, wear-resistant pen head large capacity
    Arcotest 44 #Dyne pen surface tension test pen, wear-resistant pen head large capacity

    Using fiber wear-resistant pen tip, size 138mm long, 15ml large capacity, Accuracy up to +/- 0.5 dyne, can test a variety of materials Surface Energy value and cleanliness, easy and fast operation.

    $ 99.00
    ARCOTest 50 #Dyne pen tip +/- 0.5 dyne accuracy
    ARCOTest 50 #Dyne pen tip +/- 0.5 dyne accuracy

    Fiber wear-resistant tip design is not easy to deform, Test accuracy of +/- 0.5 dyne, 2-4 seconds after drawing the line to observe the results, suitable for a variety of materials Surface Energy detection.

    $ 99.00

    Articles

    Dyne Pen Selection, Surface Energy Test Range, and Pen Tip Lifespan
    The dyne pen is used to evaluate the wettability of material surfaces, reflecting the effectiveness of treatments by measuring surface energy.
    Buchholz indentation tester measures the indentation hardness of varnish.
    The Buchholz indentation test is a method for measuring the indentation hardness of coatings such as varnishes. It involves applying a specific indenter to the coating surface under a standard load, and after unloading, the length of the residual indentation is measured. A longer length indicates lower hardness.