Measured value 500N, suitable for tape, PCB, adhesive tape and other materials disbonding force test, supporting the Force Gauge test bench.
Measurement range 1.0-300 mm, error +/- (1% H +/- 0.1) mm, support Speed of sound measurement and upper and lower limit alarm, suitable for a variety of material thickness detection.
Measurement range 1.2~ 225mm, support Speed of sound measurement and 12 data storage functions, with upper and lower limit alarm settings and coupling status prompts, suitable for a variety of material thickness detection.
Three cutting methods are available, with a maximum cutting diaMeter of 30mm. It is equipped with a 7-inch Touchscreen and a fully enclosed safety protection structure. The work surface is made of stainless steel, and fast clamps and vertical clamps are provided to meet different sample clamping needs.
Suitable for 300 ℃ high temperature material thickness measurement, range 2.0~ 100mm, diaMeter 14mm, minimum diaMeter 30mm, 5MHz Frequency to achieve accurate measurement.
Measurement range 1.5~ 200mm, error +/- (0.5% H + 0.2) mm, with low voltage prompt function, portable design for outdoor use, suitable for thickness measurement of various materials such as metals, ceramics, plastics.
With penetrating coating measurement function, direct measurement of substrate thickness without sanding paints, Measurement accuracy +/- (0.5% H + 0.05) mm, support 2.3 inch color screen display and large capacity Data storage.
Measurement range 0-4mm, resolution up to 0.001mm, contact pressure 100 +/- 10kPa, measurement surface parallelism ≤ 0.002mm, to ensure accurate and reliable thickness measurement.
Using microprocessor technology implementation 0.7-400 mm thickness measurement, resolution is +/- 0.01mm, support five Probe options, with automatic shutdown and backlight display function.
Adopt magnetic thickness measurement method, measurement range 0-1250μm, error +/- 3%, with continuous and single measurement mode, can store 1560 measurement data, support a variety of calibrating methods.
Measurement thickness up to 63.5 mm, accuracy of +/- 3%, measurement of magnetic and nonmagnetic metal substrates on nonconductive coatings, equipped with braided stainless steel cable anti-torsion wear.
Measurement range 0-4mm, resolution 0.001mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², automatic reciprocating motion to complete thickness measurement.
Glass thickness and air interlayer thickness can be measured at the same time. Glass thickness range is 70mm, air interlayer range is 34mm, light and portable operation is simple.
Measurement range of 5-500μm with a three-blade design, LED Illumination Microscope and swirl/spin system for accurate assessment of Coating thickness and substrate defects.
With bidirectional measurement function, known Speed of sound thickness or known thickness can measure Speed of sound, Measurement range 0.75~ 400mm, error +/- (0.5% H + 0.1) mm, support USB and Bluetooth data output.
