Speed up to 30000rpm, the maximum processing viscosity of 10000mPa.s, the use of claw high shear head structure and triple safety protection, can quickly homogenize tissue samples, stator and rotor interchangeable cost savings.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Range 320~ 320000000mPa · s, support 0.1~ 200rpm stepless speed change, LCD screen can simultaneously display viscosity, shear rate, shear stress and other sets of paraMeters, with a small number of sample adapters only 10-20mL sample volume.
Small hydraulic device to achieve masonry shear test, rated thrust 150KN, digital pressure Gauge direct reading, accuracy +/- 1%, detection of local damage, easy to operate.
Using 750W Motor Power, the speed range is 60-8000rpm, which integrates the three functions of stirring and dispersing grinding, and generates a strong shear force through high-speed swirling/spinning to achieve efficient Mixing & dispersing effect.
Using 16-bit microcomputer processor and stepper motor high subdivision drive, the whole process of stepless variable speed and stable Rotation speed, Measurement accuracy of +/- 1% F. S, LCD screen can display viscosity, shear rate, shear stress, Rotation speed, temperature and torque and other paraMeters.
Set stirring, dispersing, grinding three functions in one, motor Power 750W, processing viscosity of 100000mPa.s, using frequency control to achieve 60-8000rpm stepless speed regulation, through high-speed swirl/spin to pRoduce strong shear effect to achieve efficient mixing.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
Rotation speed of 3000rpm, Processing capacity 20m ³/h, using three groups of stator structure to achieve strong impact and shear, with strong self-priming capacity and low lift transport function, can operate stably for a long time.
The rotational speed range is 200-11000rpm, the processing capacity is up to 40L, and the precision-matched stator structure is used to achieve high-efficiency shear emulsification, which is suitable for the dispersion of various viscosity liquids and granular materials.
With a speed of up to 30000rpm and a processing viscosity of 10000mPas, the claw-type high-shear structure and interchangeable stator and rotor provide triple safety protection and continuous 6-speed regulation, ensuring efficient dispersion and durability.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Rotation speed up to 3000rpm, Processing capacity 11m ³/h, three sets of rotating stator structure to achieve strong impact and shear, double mechanical sealing design to ensure no leakage, jacket chilled down to support long-term operation.
Rotation speed up to 3000rpm, Processing capacity 16m ³/h, using three-stage stator structure to achieve strong impact and shear, double-end mechanical sealing without leakage, jacket chill down design to support long-term operation.
Using 316 stainless steel working head, Speed range 1000-13000rpm, maximum processing viscosity 8000mpa.s, with stepless speed regulation and real-time data display function, suitable for shear emulsification experiments of various viscosity liquids.
