Planetary Power Disperser

The planetary power disperser generates shear forces through the combined motion of revolution and rotation, creating a three-dimensional vortex flow of materials within the container. It is used for solid-liquid mixing and dispersion in industries such as coatings and inks, enabling efficient particle refinement and homogenization.
Selection
When selecting, consider the viscosity of the material to match the motor power, and determine the container volume based on the batch size. Pay attention to the speed range and ratio of revolution and rotation. For jacketed containers, verify temperature control requirements. Conduct practical tests to evaluate the impact of the gap between the dispersion disk and the container on performance.

Terms

Instruments

Adopt biaxial planetary motion structure, revolution 0-70rpm and rotation 0-80rpm adjustable, equipped with automatic wall scraping device to achieve no dead point mixing, Total Power 6.75kw to meet a variety of material handling needs.

$ 7303.00

Six-axis planetary stirring structure, equipped with high-speed disperser and low-speed twist paddle, Rotation speed 0-90rpm, dispersion Rotation speed 0-3800rpm, can achieve no dead angle mixing of materials, and has an online temperature measurement system, temperature error less than 1 ℃.

$ 82694.00

Using 750W Motor Power, the speed range is 60-8000rpm, which integrates the three functions of stirring and dispersing grinding, and generates a strong shear force through high-speed swirling/spinning to achieve efficient Mixing & dispersing effect.

$ 756.00

Set stirring, dispersing, grinding three functions in one, motor Power 750W, processing viscosity of 100000mPa.s, using frequency control to achieve 60-8000rpm stepless speed regulation, through high-speed swirl/spin to pRoduce strong shear effect to achieve efficient mixing.

$ 687.00

360 ° tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 12L, minimum discharge particle size 0.1μm, support a variety of grinding methods and materials, easy operation and power-off protection function.

$ 4213.00

Adopting a six-axis planetary stirring structure, including two sets of high-speed dispersers and low-speed twist paddles, with a revolution speed of 0-80rpm and a rotation speed of 0-3800rpm, it can achieve no dead-angle mixing, with a Vacuum Level of -0.098MPa, suitable for materials with a viscosity of up to 1 million mPa · s.

$ 14274.00

Driven by servo brushless motor, power 750W, speed range 0-7000rpm, support 24 hours of continuous operation, dispersion disc can be disassembled and replaced, 304 stainless steel material is corrosion-resistant and easy to clean.

$ 391.00

360 ° tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 10L, minimum discharge particle size 0.1μm, support dry grinding wet grinding and other methods, can be equipped with a variety of materials ball mill Tank, easy to operate and with power protection function.

$ 4037.00

Using the principle of planetary motion, the grinding time is only 15-20 minutes, and the discharge particle size is up to 0.1 micron; it supports dry grinding, wet grinding, vacuum grinding and other methods, equipped with four-station design, Rotation speed 800rpm, suitable for various sample characteristics.

$ 1499.00

The equipment is equipped with 350W power and 0-4000rpm speed range. The height can be adjusted flexibly with a lifting stroke of 32cm. The 304 stainless steel dispersion disc is corrosion-resistant and easy to clean. It is equipped with two bucket clamps to ensure stable operation.

$ 217.00

Adopting the principle of planetary motion, the grinding time only takes 15-20 minutes, the discharge particle size reaches 0.1 micron, supports dry grinding, wet grinding, vacuum grinding and other methods, and is equipped with a 200CFM heat dissipation system and a low center of gravity design to ensure stable operation.

$ 1573.00

The planetary coaxial coaxial fretting focusing device is used for comfortable and stable focusing; the total magnification is 40X-1600X, and it is equipped with a liftable Abbe condenser and a double-decked mechanical stage to observe unstained specimens clearly.

$ 1977.00

Using the principle of planetary motion, the grinding time is only 15-20 minutes, the discharge particle size can reach 0.1 micron, support dry grinding, wet grinding and other grinding methods, simple operation and convenient maintenance.

$ 1499.00

Adopting the principle of planetary motion, the particle size of grinding discharge can reach 0.1 μm, supporting dry grinding, wet grinding, vacuum grinding and other methods, with four stations and 800rpm Rotation speed, safe and stable operation.

$ 1866.00

Adopting a planetary two-way swirl/spin structure, the mixing arm runs in reverse with the basket to achieve rapid mixing, with a maximum load of 300g and a speed range of 400-2800rpm. The equilibrate is quiet and can be operated directly in the syringe or test bottle.

$ 5237.00

Articles

When selecting a laboratory disperser, it is essential to evaluate the dispersion capacity and the speed range.
When selecting a laboratory disperser, it is crucial to evaluate the dispersion capacity and speed range. The dispersion capacity should be determined based on parameters such as material viscosity and solid content to avoid uneven dispersion or localized overheating caused by excessive or insufficient capacity.
Capacity Matching for Laboratory Small Dispersers and Pilot Dispersers
This article primarily discusses how to select the appropriate disperser for laboratory research and process development.
Laboratory dispersers achieve efficient dispersion of paint pigments.
This article introduces how laboratory dispersers efficiently disperse paint pigments. They break up pigment agglomerates through mechanical actions such as shear force, involving three stages: wetting, dispersing, and stabilizing.
Selection of disperser speed range and matching of dispersing disc form with container
This article discusses the technical points in the selection of a disperser, including the speed range, the form of the dispersion disc, and the matching with the container.
The impact of the disperser impeller structure on dispersion effectiveness.
This article mainly discusses how the impeller structure of a disperser affects the dispersion effectiveness. The impeller is the core component of a disperser, and its design directly influences the uniformity and stability of the final mixture.
Application of High-Speed Disperser in the Preparation of Water-Based Inks
This article introduces the application of a high-speed disperser in the preparation of water-based inks. It first explains the working principle of the equipment, which involves generating shear forces through high-speed rotation to disperse particles.