Industrial Sensor, Response Time less than 30 seconds, accuracy +/- 3% FS, with explosion-proof structure and 4-20mA standard signal output, suitable for a variety of Gas detection needs.
Using Industrial Sensor, Response Time is less than 30 seconds, accuracy +/- 3% FS, with 4-20mA signal output and RS485 communication, the shell is die-cast aluminum explosion-proof structure, suitable for -20 ℃~ 50 ℃ working environment.
Using explosion-proof composite explosion-proof technology, pumping rate 8L/S, noise as low as 66dB, equipped with gas ballast valve can extract a small amount of water vapor, suitable for flammable and explosive dangerous places.
Explosion-proof structure design, Response Time is less than 30 seconds, with 4-20mA standard signal output, can detect a variety of gas concentrations and set high and low alarm points to ensure industrial environment safety monitoring.
Electrochemical sensor, Response Time less than 30 seconds, resolution of 0.1ppm, with explosion-proof structure, support 4-20mA signal output, Operating temperature range -20 ℃ to 50 ℃.
Electrochemical sensor, Response Time less than 30 seconds, Measurement range 0~ 10ppm, with explosion-proof structure and 4-20mA standard signal output.
Industrial grade Electrochemical sensor, Response Time less than 30 seconds, 4-20mA standard signal output, the shell with explosion-proof structure, support wall mounting, suitable for a variety of industrial environments.
Using Industrial Sensor, Response Time is less than 30 seconds, accuracy is up to +/- 3% FS, with explosion-proof and explosion-proof structure, support multi-Gas detection and sound and light alarm function, power consumption is only 3W.
It adopts explosion-proof composite explosion-proof technology to ensure safe operation. It is equipped with an anti-suction valve to prevent oil from being sucked back. It is equipped with a gas ballast valve to adjust the Vacuum Level. The pumping rate is 24m ³/h, and the noise value is 58dB.
Using explosion-proof composite explosion-proof technology, pumping rate of 4L/S, noise only 63dB, equipped with gas ballast valve can remove a small amount of water vapor, safe and reliable for dangerous environment.
Using explosion-proof composite explosion-proof technology, pumping rate 2L/S, noise as low as 63dB, equipped with gas ballast valve can extract a small amount of water vapor, safe and reliable.
The explosion-proof structure design, Response Time is less than 30 seconds, resolution of 0.1ppm, can detect a variety of gas concentrations, with sound and light alarm function to ensure safety monitoring.
Electrochemical sensor and catalytic combustion technology, with 4~ 20mA and RS485 output, support infrared remote control debugging, range 50ppm, operating temperature -20~ 50 ℃, explosion-proof grade Ex d ⅱ C T6 Gb.
It adopts flameproof structure design, supports 4-20mA, RS485 and switch output, Response Time ≤ 30 seconds, Detection error ≤ +/- 3% F.S. It can be operated by remote control without opening the lid, with sound and light alarm function, suitable for dangerous environment gas monitoring.
With explosion-proof IP66 Protection Rating, Response Time T90 ≤ national standard, support remote paraMeter configuration and program upgrade, built-in multiple alarm functions and dual operation mode, adapt to -40~ 55 ℃ working environment.
