11 tooth cutter design, 2mm pitch, single-sided simple cutter head, can carry out cross-cut experiment, test coating adhesion, in line with a number of international standards.
The number of teeth is 11, the spacing is 1mm, and the single-sided simple cutter head design can be used for cross-cutting experiments. Standard two cutter heads are provided for easy operation.
Equipped with 1mm and 2mm cutter head spacing, the number of cutter teeth is 11, which can meet the needs of different paint film thickness testing, easy to operate and in line with international standards.
Made of stainless steel, with 6 cutter teeth, the cutter tooth spacing is 2mm, which can provide a uniform cutting effect and is suitable for paint film adhesion testing.
Adopting 6 cutter face circumference multi-face cutter tooth design, the service life is significantly extended; the number of cutter teeth is 11, and the spacing is 2mm, which is suitable for hard substrate testing in the range of 60-120μm film thickness.
Made of stainless steel, with 6 cutter tooth designs, with a cutter tooth spacing of 3mm, strong durability and stable cutting effect, suitable for accurate paint film testing requirements.
The number of teeth 6, spacing 3mm, using circumferential multi-faceted cutter surface design, long service life, suitable for film thickness greater than 120 μ m hard substrate test cross-cut.
Adopting 6 cutter face circumference multi-face cutter tooth structure, the service life is significantly improved. The cutter tooth spacing is 1mm, which is suitable for the testing requirements of solid substrates with film thickness below 60μm.
Equipped with three swirl/spin cutter heads, the tooth spacing is 1mm, 2mm and 3mm respectively, and it is designed according to ISO2409 standard for accurate evaluation of coating adhesion performance.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
The circular cutter is designed with eight incisions and 1mm spacing between the teeth. It is suitable for strong substrate adhesion testing with a Coating thickness of less than 60 microns and meets the requirements of ISO 2409.
The number of teeth is 6 teeth, the spacing is 2mm, and the multi-cutter surface circumference and multi-faceted design is adopted, which has a long service life and is suitable for 60 to 120μm hard substrate samples.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Made of stainless steel, with 6 precision teeth, the spacing is accurate to 1mm, and the cutting edge is kept sharp to ensure the accuracy and Repeatability of the paint film test.
