Range 10kN, accuracy ≤ +/- 1.0% F.S, using mechatronics design, weight only 2.8kg, handle operation labor-saving, can directly display the strength value and have automatic shutdown function.
The highest temperature is 1400 ℃, the Furnace volume is 4.5L, and the aluminum oxide fiber Furnace and silicon carbon Rod heating elements are used to support the inert gas environment and ensure the uniform and stable sintering of the material.
The device uses mechatronics design, weight only 3.5kg easy to carry; equipped with High Accuracy S type Sensor, accuracy of 0.5% F.S; support 0.1-50 mm/min adjustable drawing speed, built-in lithium battery for outdoor use.
Using 330 * 230mm carbon steel baseplate and 22 * 985mm stainless steel pole, with aluminum alloy chuck, to achieve stable clamping and flexible height adjustment, suitable for a variety of experimental devices.
4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
Electric Circle-drawing is used to ensure uniform speed and constant strength, Travel 20-80mm adjustable, Rotation speed 10-120 +/- 1 rpm adjustable, equipped with automatic judgment prompts and precision dual rail system to improve test Repeatability and data accuracy.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
Adopt S-type Tension Sensor to Ensure High Accuracy, Built-in Micro Hydraulic System, Support Strength and Force Measurement modes, Continuous Operating Time over 200 hours, Range 0~ 10KN.
Using mechatronics design, equipped with High Accuracy S-type Sensor and screw structure, the range is 0~ 10.000KN, the resolution is up to 0.001KN, 500 pieces of data can be stored and 10 segments of fold line correction can be supported.
Hollow self-resetting hydraulic cylinder structure, maximum pulling force 500kN, Indication Error ≤ +/- 1% F. S; with 240 * 320 color Touchscreen, support automatic data storage and drawing force-time Linear dispersion display function.
Adopting manual sprocket drive structure, Working Travel ≥ 80mm, equipped with four weight combinations, accurate drawing is achieved through replaceable 808 stylus, and different diaMeter graphics are supported.
Using electronic technology and LCD screen, impeller rotation frequency 49 +/- 1.5S-1, motor power 370W, wet dissociation pulp to maintain the original fiber structure, easy to operate.
The steel stylus is used for precision drawing, the diaMeter range is 0-10.5 mm, and it is equipped with multiple sets of weights to achieve accurate loading.
The maximum temperature is 1200 ℃, the Furnace volume is 80L, and the temperature rise to 1200 ℃ is less than 25 minutes. Ceramic fiber insulation material is used, the surface temperature is low, the temperature control accuracy is +/- 1 ℃, and it has multi-step temperature control function, and the temperature fluctuation is small.
Operating temperature up to 1700 ℃, Furnace volume 80L, aluminum oxide fiber Furnace and double chill down system, support inert and reducing atmosphere environment material sintering treatment.
