CATEGORIES

    Low Temperature Constant Temperature and Humidity Chamber

    Overview Products Knowledge Standards Terms
    The low-temperature constant temperature and humidity chamber maintains a set low temperature, constant temperature, and humidity environment within an enclosed space through a refrigeration system and a humidification device. It is used to simulate product performance testing under cold and humid conditions and is commonly applied in fields such as material weather resistance and electronic component stability testing.
    Selection
    When selecting, it is essential to match the testing requirements: consider that the temperature range covers the expected low-temperature values, the humidity control accuracy meets standard requirements, the chamber volume is suitable for the sample size, and also pay attention to the equipment's energy consumption, operational stability, and maintenance convenience.
    Min-TEMP
    Max-TEMP
    Min-humidity
    Max-humidity
    volume
    Temp Uniformity
    TEMP fluctuation
    Humidity deviation
    Humidity Uniformity
    Test Types
    Cooling Method

    Terms

    Low-temperature Wear Resistance Testing Machine
    Low Temperature Brittleness Testing Machine
    High and Low Temperature Test Chamber
    Ultra-Low Temperature Constant Temperature Water Bath
    Laboratory flash point tester
    Low temperature constant temperature bath
    High and Low Temperature Humidity Test Chamber
    Fully Automatic Open Cup Flash Point Tester
    High and Low Temperature Constant Temperature Oil Bath
    High-speed Freezing Centrifuge

    Standards

    Incoming GB/T 46513-2025
    Electrochemical performance test of lithium ion battery cathode materials—Test method for low temperature performance
    Active GB/T 20154-2024
    Low Temperature Storage Box
    Active GB/T 228.3-2019
    Metallic materials—Tensile testing—Part 3: Method of test at low temperature
    Active GB/T 38534-2020
    Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature
    Active GB/T 38924.2-2020
    Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test
    Active GB/T 12085.23-2022
    Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
    Active GB/T 12085.22-2022
    Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
    Active GB/T 12085.2-2022
    Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
    Active GB/T 2423.102-2008
    Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal）
    Active GB/T 2423.59-2008
    Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature(cold and heat)/low air pressure/vibration（random）
    Active GB/T 32065.2-2015
    Test Methods of Oceanographic Instruments—Environmental Test Part 2: Low Temperature Test
    Active GB/T 39933-2021
    Rotational moulding—Test method for low temperature impact
    Active GB/T 28958-2012
    Test methods of low temperature performance for passenger car
    Active GB/T 33622-2017
    Flexible cellular polymeric materials—Low-temperature flex test
    Active GB/T 23711.2-2019
    Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing

    Instruments

    YIHENG BPS-50CL Constant Temperature and Humidity Chamber Programmable Humidity Chamber Fluorine-free design temperature limit alarm
    YIHENG BPS-50CL Constant Temperature and Humidity Chamber Programmable Humidity Chamber Fluorine-free design temperature limit alarm

    Temperature range -10~ 100 ℃, humidity control 35~ 95% RH, with independent temperature limit alarm system and multi-stage programmable PID controller to ensure safe operation and precise control of temperature and Humidity.

    $ 3078.00
    YIHENG BPS-800CL Constant Temperature and Humidity Chamber Programmable Humidity Chamber
    YIHENG BPS-800CL Constant Temperature and Humidity Chamber Programmable Humidity Chamber

    Temperature range -10~ 100 ℃, Temperature resolution 0.1 ℃, using programmable PID controller and TMHM equilibrating Conditioning method, temperature and humidity control accurate fluctuation is small, with independent temperature limit alarm system and a variety of Safety protection functions.

    $ 7871.00
    HUITAI LHS-150SC Constant Temperature and Humidity Chamber environmental test Chamber Temperature and Humidity Control
    HUITAI LHS-150SC Constant Temperature and Humidity Chamber environmental test Chamber Temperature and Humidity Control

    Adopt mirror stainless steel liner and PID Control mode, Temperature range 0~ 60 ℃, Humidity deviation +/- 5~ 8% R.H., 99 cycle programs and independent temperature limit alarm system.

    $ 1414.00
    YIHENG LHS-500HC-I Constant Temperature and Humidity Chamber Professional type, mirror stainless steel liner TMHM temperature and humidity control
    YIHENG LHS-500HC-I Constant Temperature and Humidity Chamber Professional type, mirror stainless steel liner TMHM temperature and humidity control

    The mirror stainless steel liner is easy to clean, the TMHM equilibrating conditioning method controls temperature and humidity accurately, Temperature Fluctuation +/- 0.5 ℃, Humidity deviation +/- 3% RH, with independent temperature limit alarm system.

    $ 5110.00
    YIHENG LHS-100CH Constant Temperature and Humidity Chamber equilibrating control, humidity control 80~ 95% RH
    YIHENG LHS-100CH Constant Temperature and Humidity Chamber equilibrating control, humidity control 80~ 95% RH

    Humidity Control Range 80~ 95% RH, Temperature resolution 0.1 ℃, Humidity deviation +/- 3% RH, Mirror stainless steel liner easy to clean, independent temperature limit alarm system to ensure safety.

    $ 1953.00
    ZKHS HS-800A Constant Temperature and Humidity Chamber 7.0 inch large screen temperature and humidity control
    ZKHS HS-800A Constant Temperature and Humidity Chamber 7.0 inch large screen temperature and humidity control

    Using French Taikang Compressor and multi-wing air supply circulation, Temperature Uniformity ≤ +/- 2 ℃, humidity deviation + 2-3% R.H, with independent temperature limit alarm and double-decked Glass observation window to ensure safe and reliable testing.

    $ 6367.00
    YIHENG BPS-250CA Constant Temperature and Humidity Chamber Programmable test Chamber Full fluorine-free design
    YIHENG BPS-250CA Constant Temperature and Humidity Chamber Programmable test Chamber Full fluorine-free design

    Temperature range -20~ 100 ℃, Humidity deviation +/- 3% R. H, using all fluorine-free environmental protection design, multi-stage programmable PID controller to ensure accurate and stable insulation Humidity control, with independent temperature limit alarm system to ensure safety.

    $ 6194.00
    YIHENG LHS-250HC-II Constant Temperature and Humidity Chamber Professional, Imported Sensor
    YIHENG LHS-250HC-II Constant Temperature and Humidity Chamber Professional, Imported Sensor

    Imported Humidity Sensor and Compressor, temperature control accuracy of +/- 0.5 ℃, humidity deviation +/- 3% RH, equipped with independent temperature limit alarm system and test hole to ensure the safety and reliability of the experiment.

    $ 4122.00
    YIHENG LHS-50CH Constant Temperature and Humidity Chamber Humidity Chamber
    YIHENG LHS-50CH Constant Temperature and Humidity Chamber Humidity Chamber

    Temperature range 10~ 85 ℃, humidity control 80~ 95% RH, fluorine-free environmental protection design, with independent temperature limit alarm system, mirror stainless steel liner easy to clean, Temperature resolution 0.1 ℃, stable and reliable operation.

    $ 1627.00
    YIHENG BPS-1000CL Constant Temperature and Humidity Chamber Programmable Humidity Chamber Multi-stage programmable PID control
    YIHENG BPS-1000CL Constant Temperature and Humidity Chamber Programmable Humidity Chamber Multi-stage programmable PID control

    Adopt multi-stage programmable PID controller to achieve accurate temperature and Humidity control, with small fluctuations; unique air duct circulation system to ensure uniform temperature and Humidity; with 100 sets of programs and 1000 segments capacity, support RS-232 or RS-485 communication interface, easy data monitoring and remote operation.

    $ 9152.00
    Lugong ST-25LA programmable constant temperature and humidity testing machine, high and low temperature heat and humidity alternating environment simulation
    Lugong ST-25LA programmable constant temperature and humidity testing machine, high and low temperature heat and humidity alternating environment simulation

    Using Nidec compressor and DuPont environmental protection refrigerant, Humidity control accuracy of 0.1 ℃, equipped with double-decked vacuum heating defrosting observation window and stainless steel sample holder, support multi-stage programming and Data storage.

    $ 3301.00
    BOZHEN GD/HS4025 High and low temperature constant damping heat test Chamber temperature and humidity control environmental adaptability test
    BOZHEN GD/HS4025 High and low temperature constant damping heat test Chamber temperature and humidity control environmental adaptability test

    The equilibrate temperature control method is used to achieve Temperature Fluctuation ≤ +/- 0.5 ° C, humidity control range is 30-98% RH, equipped with a large area observation window to observe the sample status in real time, and the studio is made of 304 stainless steel.

    $ 5705.00
    KESIONOTS KS-HW408L Humidity Chamber 150 ℃ high and low temperature heating and humidity test
    KESIONOTS KS-HW408L Humidity Chamber 150 ℃ high and low temperature heating and humidity test

    Adopt cascade refrigeration system to achieve -70 ℃ low temperature, with 1000 segment program control capacity, support RS-232 communication interface and Chinese and English display switching, Temperature Uniformity up to +/- 1.0 ℃ and humidity fluctuation +/- 2.0% RH.

    $ 7287.00
    YIHENG BPS-100CB Constant Temperature and Humidity Chamber Programmable Touchscreen Temperature Control -40~ 100 ℃ Humidity Control 35~ 95% RH
    YIHENG BPS-100CB Constant Temperature and Humidity Chamber Programmable Touchscreen Temperature Control -40~ 100 ℃ Humidity Control 35~ 95% RH

    Temperature range -40~ 100 ℃, humidity control 35~ 95% RH, fluorine-free design, imported stainless steel liner, support multi-stage programming and remote communication, ensure uniform and stable insulation Humidity.

    $ 5307.00
    YIHENG BPS-100CL Constant Temperature and Humidity Chamber Programmable test Chamber Temperature control -10~ 100 ℃ Humidity control 35~ 95% RH
    YIHENG BPS-100CL Constant Temperature and Humidity Chamber Programmable test Chamber Temperature control -10~ 100 ℃ Humidity control 35~ 95% RH

    Using multi-stage programmable PID controller and equilibrate Conditioning method, temperature control fluctuation high temperature +/- 0.5 ℃, humidity control deviation +/- 3% RH, with independent temperature limit alarm and a variety of protection functions.

    $ 3630.00

    Articles

    Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
    This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
    Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
    The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
    High and low temperature alternating test chamber for measuring low-temperature embrittlement temperature of plastics
    This article introduces how to use a high-low temperature alternating test chamber to determine the low-temperature brittleness temperature of plastics.
    Thermal shock test chamber measures the thermal shock resistance of polymer films.
    This article introduces how to test the thermal shock resistance of polymer films using a thermal shock test chamber. The test involves rapidly switching the film between high and low temperatures to simulate the drastic temperature changes that may occur in actual use, thereby generating thermal stress within the material.
    Thermal Shock Test Chamber Measures Film's Temperature Change Resistance
    The thermal shock test chamber creates thermal stress inside the film by rapidly switching between high and low temperature environments, testing its resistance to temperature changes. During the test, key parameters such as temperature range and dwell time need to be set, and the film is observed for issues such as cracking or performance degradation.
    Flash point tester for determination of closed cup flash point of varnish
    This article introduces the method for determining the closed-cup flash point of varnish using a flash point tester. The flash point refers to the minimum temperature at which the vapor on the surface of the varnish ignites momentarily when exposed to a flame after heating. It is a crucial indicator for assessing the fire risk during its production, storage, and transportation.
    Constant Temperature and Humidity Chamber Testing for Environmental Adaptability of Hot Melt Adhesive
    This article introduces the method of testing the environmental adaptability of hot melt adhesive using a constant temperature and humidity chamber. The performance of hot melt adhesive is easily affected by temperature and humidity, and the purpose of the test is to evaluate its stability under different climatic conditions.
    Thermal Shock Test Chamber Evaluates Coating Thermal Stability
    The thermal shock test chamber simulates sudden temperature changes by rapidly switching between high and low temperature environments, used to evaluate the thermal stability of coatings. In practical applications, coatings may develop internal stresses due to drastic temperature fluctuations, leading to issues such as cracking and peeling.
    Constant Temperature and Humidity Chamber Testing for Ink Environmental Adaptability
    This article introduces the method of testing the environmental adaptability of ink using a constant temperature and humidity chamber. Ink is prone to issues such as adhesion, discoloration, or reduced adhesion when exposed to changes in temperature and humidity.
    The necessity of explosion-proof high and low temperature test chambers in lithium battery testing
    Lithium batteries pose a risk of thermal runaway or even explosion when tested under extreme temperatures. Explosion-proof high-low temperature test chambers, designed with pressure relief structures, explosion-proof electrical components, and intelligent monitoring systems, can safely release energy and ensure the safety of the testing process.
    Key Points for Selecting Low-Temperature Test Chambers in Rubber and Plastic Brittleness Temperature Testing
    In the testing of brittle temperature for rubber and plastics, the selection of a low-temperature test chamber must ensure testing accuracy. When choosing the equipment, it is essential to consider various parameters comprehensively based on the requirements of the testing standards.
    The flash point tester measures the safety baseline value of the solvent.
    The flash point refers to the minimum temperature at which the vapor of a flammable liquid can be ignited. It is not a fixed value but depends on the testing method and instrument. Data measured by flash point testers serve as a critical basis for evaluating the fire risk of solvents and establishing standards for safe storage and operation.
    Safety Regulations for Closed Cup and Open Cup Methods for Testing the Flash Point of Coatings.
    This article introduces two main testing methods for the flash point of coatings: the closed-cup method and the open-cup method. The flash point refers to the lowest temperature at which the vapor of a coating momentarily ignites upon encountering an open flame, serving as a critical indicator for assessing the risk of fire and explosion.
    Tensile Testing Machine Evaluates High and Low Temperature Tensile Properties of Hot Melt Adhesive
    This article introduces how to use a tensile testing machine to test the tensile properties of hot-melt adhesives at different temperatures. The performance of hot-melt adhesives varies with temperature: they may soften at high temperatures and become brittle at low temperatures.
    The essential difference between thermal shock test chambers and high-low temperature alternating test chambers.
    Both thermal shock test chambers and temperature cycling test chambers are used to test the temperature resistance of products, but their core differences lie in the method and purpose of temperature change.