The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Measurement range 0~ 14pH, Operating temperature 0~ 80 ℃. High strength conical sensitive membrane can pierce semi-solid sample.
The sampling area is 100mm ² and the error is controlled within +/- 0.35cm ², which can handle 0.1~ 1.2mm Film thickness materials. The circular sampling design is used to ensure the standard of the sample, and the operation is simple and the results are reliable.
Suitable for solid-state semi-solid piercing measurement, using high-performance ceramic core liquid junction and long-life reference structure, Measurement range 0-14pH, Temperature range 0-60 ℃.
Contains 216 Classic Colors, semi-matte surface, full page color sample size 5.0x15.0cm, monochrome design for easy comparison, with U-shaped protective cover for loss prevention.
The Fan Color Chart contains 1825 semi-matte Colors, with a color sample size of 2.5x5cm. It provides multi-language auxiliary name translation, and the upgraded model adds 200 new colors, which is convenient for industry color standardization applications.
Optical inspection system with infinity, semi-retouching color difference objective and phase contrast condenser provides 40X-1000X magnification for viewing thicker samples and enhancing the three-dimensional profile of cell structure.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
The fan-shaped design contains 490 Colors, of which 420 are semi-matte solid colors developed by water-based paints, and 70 are high-gloss metallic colors developed by acrylic coatings. The size is 5.0x21.0cm, which is easy to carry and compare.
The minimum measurable inner diaMeter is 10mm, the maximum sample thickness is 6mm, and the imported special steel crimp and high-strength pointer components are used. It has good Stability and portability and supports Hardness value conversion.
Special No. 10 steel high temperature quenching knife edge, smooth cutting without burrs; one-piece casting structure is sturdy and durable; sampling area 100cm ², error +/- 0.35cm ², suitable for 0.1~ 1.2mm Film thickness material.
Using positive pressure test principle, Measurement range 0~ 1.6MPa, fully automatic operation, support three test modes, built-in calibrating program, suitable for quantitative measurement of various sealing performance indicators.
The special No. 10 steel knife edge is used to ensure durability, the punching sample is smooth without burrs, the integrated casting structure is sturdy and not deformed, the sampling area is 100cm2, and the sampling Film thickness range is 0.01-1 mm.
Large screen LCD graphic display, Wavelength range 325~ 1100nm, can accommodate 5~ 100mm Cuvette, support photometric detection and quantitative analysis, with Automatic calibration and ultra-low stray light, to ensure detection of linear Precision.
Glass sensitive film can fully fit the sample sensing surface, PTFE liquid junction to ensure measurement Stability, Operating temperature range 0~ 60 ℃, suitable for semi-solid measurement.
