Using 160 line metal anilox roller and rubber roller combination, print width 70mm, suitable for inks proofing, wet film thickness and the number of lines inversely proportional, proofing authenticity and easy to operate.
Pressure adjustable range -1 to + 1mm, proofing speed support 400-700rpm three-speed frequency conversion speed regulation, uniform ink time 15-800 seconds adjustable, fixed structure to ensure proofing Stability.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Ceramic roller structure, line number standard 600LPI can be customized 70-1200 lines, BCM range 1.6-5; drawdown blade, ceramic roller and other components can be individually adjusted left and right pressure, proofing speed 0-80 m/min adjustable, support material thickness 0.01-2 mm.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Adopt circular embossing method to improve the fit, the proofing speed is adjustable from 0-300rpm, equipped with High Accuracy Servo Motor and quick replacement anilox roller system, support a variety of gray scale customization.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Using formed pRoduction process, wet film thickness 45.7μm, diaMeter 9.52mm, total length 400mm, application width 300mm, stainless steel material to ensure durability and accurate Spreader effect.
White part reflectance 80 +/- 2, non-Laminating design to enhance paint wettability, test area of 0.1 square Meters, Curl and checking resistance, suitable for brushing applications.
Using formed pRoduction process, the film thickness is 80μm, the application width is 300mm, and the accuracy is up to 0.1μm. It is suitable for the experimental environment with high film accuracy requirements.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
