Built-in three measurement units can simultaneously detect pH, Conductivity Detector and dissolved oxygen, support automatic temperature compensation and ElectRode diagnosis, with IP54 Protection Rating, data storage capacity of 500 groups, support GLP specification to achieve data traceability.
High Accuracy Sensor for Multi-ParaMeter simultaneous measurement, Measurement speed up to 0.4 seconds, temperature error +/- 0.5 ℃, with backlight display and automatic shutdown function, portable design for on-site rapid detection.
Measurement range up to 320μm, support Multi-ParaMeter such as Ra, Rz, etc., with automatic range switching and real-time waveform display function, Continuous Operating Time over 20 hours.
Adopt DSP chip to realize fast data processing, support Multi-ParaMeter measurement such as Ra, Rz, etc., equipped with TYPE C and Bluetooth interface for data transmission, Continuous Operating Time exceeds 20 hours, and stores 100 sets of data.
With pH/ORP/Temperature Multi-ParaMeter monitoring, Adjustable peristaltic pump Flow rate 0.5-3 L/h, Support automatic temperature compensation and dose consent function, Data recording interval of 10 seconds can be stored for 60 days.
Combined ElectRode can simultaneously measure pH, conductivity, TDS, salinity and temperature, support one-button switching paraMeters; Conductivity Detector ElectRode platinum black to reduce Polarization effect, accuracy of +/- 0.01pH; with automatic temperature compensation and IP67 dustproof and waterproof design.
Support three-channel simultaneous measurement, equipped with 5.5-inch high definition touch screen, pH Measurement accuracy of +/- 0.002pH, with automatic temperature compensation and end point locking function, suitable for fast and accurate detection in a variety of environments.
Equipped with 5.5 inch high definition touch screen, supports dual channel simultaneous measurement of 8 paraMeters, pH accuracy of +/- 0.002, with automatic temperature compensation and end point locking function, built-in GPS positioning and real-time data transmission.
It can simultaneously measure pH, ORP, Ion concentration and other 9 paraMeters, equipped with Automatic calibration reminder and ElectRode diagnostic function, built-in 500 data storage capacity, support USB Communication interface to transmit data.
Equipped with capacitive Touchscreen and color display, it supports five-point pH automatic identification calibrating and four-point EC calibrating. The data storage capacity reaches 100 groups, each group has 50,000 data points, and meets the USP- < 645 > conductivity analysis standard, which is especially suitable for pure water measurement applications.
Explosion-proof enclosure design ensures stable operation in harsh environments, can simultaneously monitor multiple particle size dust concentration without changing the cutter, Measurement range 0.01-100 mg/m ³, built-in protective gas curtain to prevent Optical inspection system contamination.
It can simultaneously read up to 8 water quality parameters, equipped with a 9000mAh large-capacity battery, supports Sensor address modification and temperature, zero point, slope calibrating, which is convenient for long-term operation and Facility Management on site.
It can simultaneously measure 16 water quality paraMeters, IP67 waterproof design, equipped with fluorescent DO Probe and automatic temperature compensation, data storage capacity of 45,000 pieces, support Bluetooth data transmission and GLP calibrated recording.
Integrate 8 water quality paraMeter measurement functions, support automatic temperature compensation and calibrated reminders, equipped with 500 sets of data storage capacity, and adopt multi-mode power supply scheme to ensure long-term outdoor use.
With 5 measurement functions, support 1 to 5 point Conductivity Detector calibrating and automatic temperature compensation, can customize 13 paraMeters, equipped with 500 data storage and USB Communication interface, suitable for a variety of water quality paraMeters accurate measurement.
