Benchmark Constant Temperature & Humidity Cabinet

Overview Products Knowledge

The standard constant temperature and humidity chamber maintains the set temperature and humidity within a sealed space through its heating and cooling system and humidification and dehumidification devices. It is used to test the performance of materials such as coatings and inks under different temperature and humidity conditions, simulating actual storage or usage environments to observe changes in the samples.

Selection

When selecting, consider that the temperature and humidity range must cover the testing requirements, with smaller fluctuations indicating more stable control. The inner chamber material should be corrosion-resistant and easy to clean, while the observation window and test ports should facilitate operation. The performance of the compressor affects the cooling rate, and the humidification method determines humidity accuracy. Safety protection functions and energy consumption data need to be verified.

Instruments

SANFA LHP-250EB Constant Temperature and Humidity Incubator Microcomputer Temperature and Humidity Control

Microcomputer temperature and humidity controller, Temperature Fluctuation +/- 0.5 ℃, humidity fluctuation +/- 5% RH, with over-temperature protection, independent temperature limit alarm system to ensure safe and stable operation of the experiment.

$ 6691.00

YIHENG LHS-100CH Constant Temperature and Humidity Chamber equilibrating control, humidity control 80~ 95% RH

Humidity Control Range 80~ 95% RH, Temperature resolution 0.1 ℃, Humidity deviation +/- 3% RH, Mirror stainless steel liner easy to clean, independent temperature limit alarm system to ensure safety.

$ 1953.00

YIHENG LHS-500HC-I Constant Temperature and Humidity Chamber Professional type, mirror stainless steel liner TMHM temperature and humidity control

The mirror stainless steel liner is easy to clean, the TMHM equilibrating conditioning method controls temperature and humidity accurately, Temperature Fluctuation +/- 0.5 ℃, Humidity deviation +/- 3% RH, with independent temperature limit alarm system.

$ 5110.00

SANFA LHP-300EL Constant Temperature and Humidity Incubator Microcomputer Temperature and Humidity Control, Environmentally Friendly Refrigerant

Adopt microcomputer temperature and humidity controller, temperature uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, equipped with mirror stainless steel liner and observation window, support programmable control and multiple safety protection functions.

$ 4843.00

YIHENG BPS-50CL Constant Temperature and Humidity Chamber Programmable Humidity Chamber Fluorine-free design temperature limit alarm

Temperature range -10~ 100 ℃, humidity control 35~ 95% RH, with independent temperature limit alarm system and multi-stage programmable PID controller to ensure safe operation and precise control of temperature and Humidity.

$ 3078.00

FARUI FR-1204-800 Programmable constant temperature and humidity testing machine Humidity control test Chamber

With -40~ 150 ℃ Temperature range and 20~ 98% Humidity control, environmentally friendly refrigerant and double-decked airtight design, support multi-stage program editing and fast temperature Humidity control, easy to move and observe.

$ 8465.00

SANFA LHP-300 Constant Temperature and Humidity Incubator Microcomputer Control Precise Temperature and Humidity

Fluorine-free design, temperature uniformity +/- 1 ℃, humidity fluctuation +/- 5 %~ +/- 8% RH, with multiple protection functions such as over-temperature and leakage, to ensure the safety and reliability of the experiment.

$ 1752.00

YIHENG LHS-250HC-II Constant Temperature and Humidity Chamber Professional, Imported Sensor

Imported Humidity Sensor and Compressor, temperature control accuracy of +/- 0.5 ℃, humidity deviation +/- 3% RH, equipped with independent temperature limit alarm system and test hole to ensure the safety and reliability of the experiment.

$ 4122.00

SANFA LHP-160 Constant Temperature and Humidity Incubator

Fluorine-free design, temperature uniformity +/- 1 ℃, humidity fluctuation +/- 5 %~ +/- 8% RH, with over-temperature, leakage, Sensor fault multiple alarm protection functions to ensure safe operation of the experiment.

$ 1229.00

YIHENG BPS-100CB Constant Temperature and Humidity Chamber Programmable Touchscreen Temperature Control -40~ 100 ℃ Humidity Control 35~ 95% RH

Temperature range -40~ 100 ℃, humidity control 35~ 95% RH, fluorine-free design, imported stainless steel liner, support multi-stage programming and remote communication, ensure uniform and stable insulation Humidity.

$ 5307.00

HUITAI LHS-150SC Constant Temperature and Humidity Chamber environmental test Chamber Temperature and Humidity Control

Adopt mirror stainless steel liner and PID Control mode, Temperature range 0~ 60 ℃, Humidity deviation +/- 5~ 8% R.H., 99 cycle programs and independent temperature limit alarm system.

$ 1414.00

SANFA LHP-300E Constant Temperature and Humidity Incubator 300L Volume Temperature and Humidity Control

300L high-capacity design, temperature uniformity up to +/- 1 ° C, humidity fluctuation of +/- 5% RH, equipped with intelligent Touchscreen controller and ultrasonic humidifier, supports programmable control and a variety of safety protection functions.

$ 2355.00

YIHENG BPS-800CL Constant Temperature and Humidity Chamber Programmable Humidity Chamber

Temperature range -10~ 100 ℃, Temperature resolution 0.1 ℃, using programmable PID controller and TMHM equilibrating Conditioning method, temperature and humidity control accurate fluctuation is small, with independent temperature limit alarm system and a variety of Safety protection functions.

$ 7871.00

SANFA LHP-250E Constant Temperature and Humidity Incubator 250L volume, small fluctuation of temperature and humidity

Volume 250L, Temperature Fluctuation +/- 0.5 ℃, Humidity Fluctuation +/- 5% RH, Fluorine-free design, mirror stainless steel liner is easy to clean and supports programmable control.

$ 2065.00

SANFA LHP-160EL Constant Temperature and Humidity Incubator Precise Temperature and Humidity Control, Environmentally Friendly Refrigerant

Environmental friendly refrigerant design, Temperature Uniformity +/- 1 ℃, humidity fluctuation +/- 5% RH, equipped with intelligent Touchscreen controller and multiple safety protection system to ensure stable and reliable experimental environment.

$ 3436.00

Articles

Constant Temperature and Humidity Chamber Testing for Environmental Adaptability of Hot Melt Adhesive

This article introduces the method of testing the environmental adaptability of hot melt adhesive using a constant temperature and humidity chamber. The performance of hot melt adhesive is easily affected by temperature and humidity, and the purpose of the test is to evaluate its stability under different climatic conditions.

Constant Temperature and Humidity Chamber Testing for Ink Environmental Adaptability

This article introduces the method of testing the environmental adaptability of ink using a constant temperature and humidity chamber. Ink is prone to issues such as adhesion, discoloration, or reduced adhesion when exposed to changes in temperature and humidity.

The difference between thermal shock test chambers and constant temperature and humidity chambers

This article compares the differences between thermal shock test chambers and constant temperature and humidity chambers in terms of working principles, key performance, and applications.

Application of Constant Temperature and Humidity Chambers in the Electronics Industry

A constant temperature and humidity chamber is a device capable of precisely controlling temperature and humidity, used to simulate various environmental conditions that electronic products may encounter. In the electronics industry, it is primarily employed to test the reliability of components, finished products, and processes, such as evaluating material aging or performance changes through high-temperature and high-humidity tests.

Technical Selection and Application of Constant Temperature and Humidity Chambers

This article primarily discusses how to select and use a constant temperature and humidity chamber. It is mainly used to test the performance of materials and products under varying temperature and humidity conditions.