Explosion-proof Disperser for Coatings

The explosion-proof paint disperser uses an explosion-proof motor to drive a serrated impeller rotating at high speed, generating shear forces within a sealed container to uniformly mix powders and liquids. Its explosion-proof structure prevents solvent evaporation from causing combustion or explosions, making it suitable for dispersing materials containing flammable solvents, such as paints and inks.
Selection
When selecting, ensure that the material characteristics match the equipment's power, the explosion-proof rating complies with workshop standards, and the kettle volume meets production requirements. Evaluate the adaptability of the stirring structure to material viscosity, the corrosion resistance of the materials, as well as practical functions such as temperature control, cleaning, and maintenance.

Terms

Standards

Instruments

Intrinsically safe explosion-proof design, up to CT4 grade, equipped with explosion-proof Sensor and display. Table size 410x510mm, weighing range 110kg, accuracy 10g, stable structure, support external calibrating and a variety of functions.

$ 190.00

Using explosion-proof composite explosion-proof technology, pumping rate of 4L/S, noise only 63dB, equipped with gas ballast valve can remove a small amount of water vapor, safe and reliable for dangerous environment.

$ 701.00

Using explosion-proof composite explosion-proof technology, pumping rate 2L/S, noise as low as 63dB, equipped with gas ballast valve can extract a small amount of water vapor, safe and reliable.

$ 517.00

Using explosion-proof composite explosion-proof technology, pumping rate 8L/S, noise as low as 66dB, equipped with gas ballast valve can extract a small amount of water vapor, suitable for flammable and explosive dangerous places.

$ 1024.00

Adopting explosion-proof, burn-seal, intrinsically safe composite explosion-proof technology, with anti-suction valve and gas ballast valve, the pumping rate is 16m ³/h, the ultimate pressure is 0.005mbar, and the noise value is 58dB (A).

$ 1063.00

The use of explosion-proof composite explosion-proof technology to ensure safe operation, pumping rate of 15L/S and noise only 66dB, equipped with gas ballast valve can handle a small amount of water vapor, compact suitable for use in hazardous environments.

$ 1308.00

It adopts explosion-proof composite explosion-proof technology to ensure safe operation. It is equipped with an anti-suction valve to prevent oil from being sucked back. It is equipped with a gas ballast valve to adjust the Vacuum Level. The pumping rate is 24m ³/h, and the noise value is 58dB.

$ 1192.00

Using 0-3000rpm stepless speed regulation, Processing capacity of 10-200L, with full explosion-proof safety design, hand lifting structure is easy to operate, suitable for high viscosity material dispersion mixing process.

$ 1768.00

Adopt 0-3000rpm stepless speed regulation, Processing capacity 10-100L, with full explosion-proof structure and hand lifting system, suitable for dispersing and mixing of high viscosity materials.

$ 1661.00

The explosion-proof composite explosion-proof technology is used to ensure safe operation, with anti-suction valve and gas ballast valve, the pumping rate is 48m ³/h, and the ultimate pressure is as low as 0.005mbar, which is suitable for dangerous environments.

$ 1889.00

Using explosion-proof composite explosion-proof technology, explosion-proof mark ExdIBT4, pumping rate 90m ³/h, limit pressure as low as 0.005mbar, noise only 58dB, suitable for hazardous environments.

$ 2922.00

Using flameproof composite explosion-proof technology, the pumping rate is 1L/S, the ultimate pressure can reach 0.006mbar, and the noise is as low as 63dB, which is suitable for flammable and explosive environments.

$ 462.00

Adopt compound explosion-proof technology, pumping rate 0.5L/S, noise value 62dB, equipped with gas ballast valve can extract a small amount of water vapor, safe and reliable to adapt to harsh environment.

$ 462.00

Using MCU chip to achieve low power consumption operation, detection error ≤ +/- 3% F. S, Response Time ≤ 30 seconds, support a variety of signal output and wireless transmission, with explosion-proof and explosion-proof structure to ensure safety and reliability.

$ 486.00

Using EX-SH784050-100 carbon steel scale body and stainless steel mask, the structure is stable. Range 61kg, Readability 1g, Fast Response Time. With intrinsically safe Explosion-proof level CT4, and standard battery, support no power use.

$ 211.00

Articles