Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
Using computer technology to ensure accurate measurement, the measurement range is 0~ 50%, the resolution is 0.1%, and the moisture content and Ambient Temperature can be measured at the same time.
It can evaporate water in solid samples of 10g or less, use disposable sample bottle sampling, vaporize by heating and transport water in high purity Developing solvent, suitable for a variety of solid or quasi-solid sample analysis.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
Imported chips ensure stable performance, 1 second Fast Response to complete the detection, measurement range 10-85%, resolution of 0.1%, suitable for all kinds of fresh meat moisture determination.
Using halogen lamp heating technology, fast drying samples and real-time display Moisture content, Moisture Precision up to +/- 0.2%, Heating Temperature range 80~ 160 ℃, suitable for a variety of sample detection.
Using electromagnetic wave scanning technology, high frequency scanning depth 50mm, Measurement range 0-99.9%, Response Time 1 second, no contact can be measured without damage to the internal moisture content of the object.
Suitable for Coulometry moisture determination, containing 500mL KF-1A Reagent and 5 bottles of 5mL KF-1B Reagent, supporting a variety of Moisture Meters to meet the needs of laboratory moisture analysis.
Using pyrolysis weight principle design, equipped with halogen heating unit, moisture readability of 0.02%, heating temperature up to 200 ℃, support automatic manual timing test, real-time display Moisture content change process.
Using annular halogen lamp heating, Temperature range RT +~ 180 ℃, the fastest few minutes to complete the measurement; Equipped with Draft Shield and imported Sensor, the heating performance is uniform and stable, supporting the simultaneous conversion of water content and solid content.
Temperature range RT +~ 180 ℃, the fastest few minutes to complete the measurement. With automatic alarm and Draft Shield design, support moisture and Solid content conversion at the same time, Test accuracy of 0.1%.
Using halogen radiation heating technology, the moisture readability reaches 0.01%, the determination of Precision +/- 0.2%, and the test is completed quickly in a few minutes, with 8 kinds of paraMeter display functions.
4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
It can measure refractive index 1.3000~ 1.7000nD and sugar content 0~ 100% Brix, with accuracy of +/- 0.0002nD and +/- 0.1% Brix, respectively, and supports temperature correction and direct data printout.
Using Coulomb ElectRode technology, it can measure 10μg~ 20mg moisture, support 10mA to 100mA electrolysis current, no need to calibrate Reagent, with RS232 interface to connect to the printer.
