The equipment has a 15-liter large-capacity water Tank and an 8mm inner diaMeter water pipe, supports 0 to 99 hours of time control, adopts stainless steel structure and automatic control device, and is suitable for coating stain resistance testing.
Equipped with double spray guns to achieve uniform lame plating, the lifting range of the spray gun is adjustable from 10-500mm, the integrated air filtrate adjustment system supports magnetic or vacuum panel fixing, and improves the coating test Repeatability.
The stainless steel pendulum pipe is used to achieve +/- 180 degree swing, equipped with 25 water spray holes and 1-4 rpm adjustable turntable, supporting 50-100kpa water pressure adjustment, and the test water can be recycled without additional waterproof treatment.
304 stainless steel one-time stretching liner without water leakage, four-corner arc design to reduce temperature control dead angle, Temperature Fluctuation +/- 0.5 ℃, hidden outlet pipe and silicone cover high temperature is not hot, heating power 400W.
Impact accuracy is ensured by double-tube guide structure, the maximum impact energy can reach 320J, the impact height error is controlled within +/- 2mm, and the automatic hammer lifting function is equipped to prevent secondary impact.
With +/- 180 degree swing tube swing and 1~ 4 rpm adjustable sample holder speed, support 50~ 100kpa water spray pressure and 99 hour time setting, and use stainless steel structure to achieve accurate water test.
The equipment has 200x200mm hot pressing area, temperature control accuracy +/- 2 ℃, heating temperature up to 250 ℃. Using light curtain protection and safety protection design, the upper and lower templates have high parallelism, and the hot pressing time, temperature and pressure can be adjusted.
Temperature range up to 500 ℃ and fluctuation only +/- 1 ℃, equipped with hot air circulation system to ensure Temperature uniformity, support 1-9999 minutes timing function, optional temperature recording and over-temperature protection device.
Temperature range RT + 20~ 400 ℃, Temperature Fluctuation +/- 1 ℃, hot air circulation system to ensure uniform temperature, support timing function and Power suppression, optional independent temperature limit alarm and RS485 interface.
Temperature range up to 500 ℃ and Fluctuation only +/- 1 ℃, equipped with hot air circulation system to ensure Temperature uniformity, support timing function and independent temperature limit alarm, optional RS485 interface to record temperature paraMeters.
Adopt stainless steel pendulum tube to achieve +/- 180 degree swing, equipped with 25 0.4mm nozzles, flow adjustment range 100-1000L/h, support sample holder 1-4 rpm adjustable speed, test water can be recycled.
Temperature range RT + 20~ 400 ℃ and fluctuation +/- 1 ℃, hot air circulation system to ensure temperature uniformity, support timing function 1~ 9999 minutes, optional RS485 interface to achieve temperature paraMeter recording.
Temperature range up to 500 ℃ and Fluctuation only +/- 1 ℃, equipped with hot air circulation system to ensure Temperature uniformity, support independent temperature limit alarm and RS485 Communication interface to meet the precise temperature control requirements in high temperature environment.
Equipped with forced hot air circulation system to ensure uniform temperature distribution, temperature control accuracy of +/- 0.3 ℃, support 0-999 hours timing and nine-point fault warning function, using PID automatic calculation to reduce manual setting inconvenience.
Temperature range RT + 30~ 500 ℃ and Temperature Fluctuation +/- 1 ℃, equipped with hot air circulation system to ensure temperature uniformity, support timing function and independent temperature limit alarm system to ensure safe operation of the experiment.
