Portable photoelectric combination design, Measurement range 0~ 199.9GS, projection angle 20º, 60º, 85ºoptional, Stability less than +/- 0.4GS/30min, suitable for a variety of flat material Glossiness detection.
Using E Illuminant irradiation and 5 times reflection projection technology, Illuminant illuminance is not less than 1200X, measurement distinctness of image level from 0.1 to 2.0, suitable for detecting coating surface clarity.
Evaluate coating distinctness by 13 kinds of image grades, Illuminant illumination is not less than 1200X, E Illuminant irradiation and 5 reflection projection, test area is not less than 60x60mm, easy to operate.
Adopt scale differential head to adjust film Film thickness, Graduation 10 μ m, film range 0~ 5000 μ m, accuracy +/- 5 μ m, drawdown blade straightness +/- 2 μ m, die steel drawdown blade wear resistance corrosion resistance.
The 4-sided design can complete different thickness films at one time, using wear-resistant and corrosion-resistant stainless steel material, film thickness 150-300μm, application width 105mm, can accurately control wet-film or dry-film thickness.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Film accuracy of +/- 2μm, high hardness stainless steel material, hardness value of 50~ 55HRC, smooth surface and support a variety of Spreader width and Film thickness specifications to ensure film accuracy and durability.
Measuring wet-film flow thickening in the vertical state, controlling the physical performance of the coating to select the appropriate wet film thickness to ensure uniform film thickness, Film thickness range 450-675μm, in line with GB/T 9264 and ASTM D 3730 standards.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Adopt scale differential head to adjust film thickness, Graduation 10μm, film range 0~ 5000μm, accuracy +/- 5μm, drawdown blade straightness +/- 2μm, suitable for precise coating preamative.
Made of 9Cr18Mo High Hardness Stainless Steel, Hardness up to 50-55HRC, with +/- 2μm accuracy and 4-sided film design, supports 37μm, 50μm, 75μm, 100μm Film thickness options.
Film Film thickness 50μm, accuracy control within +/- 2μm, high Hardness stainless steel material, Hardness of 50~ 55HRC, to ensure experimental accuracy and durability.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
Using the formed pRoduction process, the wet film thickness is only 4.6μm, the film accuracy is up to 0.1 micron, the effective application width is 30cm, and it has the advantage of continuous wire, which can be adapted to the use of automation equipment.
