Controlled by single chip microcomputer, temperature accuracy +/- 0.03 ℃, kinematic viscosity measurement range 0.5~ 20000mm ²/s, automatic tracking of heating Linear dispersion and precise control of water Bath and oil Bath temperature.
Using 10L Glass Bathtub, small size and less medium consumption, temperature control accuracy of +/- 0.05 ℃, automatic accurate timing and viscosity calculation, support 4 holes at the same time experiment, easy and reliable operation.
Ubbelohde ASTM standard design, viscosity measurement range of 20-100cSt, based on the principle of capillary tubing can accurately determine the kinematic viscosity of liquids, suitable for a variety of fluid analysis.
The instrument adopts Precision Platinum Resistance Sensor with temperature control accuracy of +/- 0.1 ℃ and kinematic viscosity measurement range of 0~ 10000mm ²/S, which is suitable for viscosity analysis of various liquids under thermostatic conditions.
U-shaped tube design, viscosity measurement range of 60-300cSt, based on the principle of capillary tubing to achieve accurate measurement of liquid kinematic viscosity and outflow time.
U-shaped tube design, viscosity measurement range of 200-1000cSt, based on the principle of capillary tubing can accurately determine the kinematic viscosity of liquids at constant temperature.
Ubbelohde ASTM standard design, viscosity measurement range of 10,000-50000cSt, based on the principle of capillary tubing flow time and kinematic viscosity proportional to ensure accurate determination of high viscosity liquids.
The capillary method is used to determine the kinematic viscosity of liquids. Based on the principle of proportional flow time and viscosity, the Measurement range 0.6-3 cSt, which is suitable for the analysis of various liquid samples.
In line with DIN 53211 standard, the outflow time is 25~ 150s, the viscosity range is 15~ 30cSt, and the aluminum alloy Cup body and stainless steel nozzle are used to quickly test low viscosity liquids.
Measurement range covering 20000 to 100000cSt, accurate measurement of liquid kinematic viscosity based on capillary tubing principle, suitable for high viscosity fluid analysis.
Made of stainless steel, with a pulp diaMeter of 50mm and a Rod length of 300mm, the standard design can be used at medium and high speeds, suitable for efficient mixing of medium and low viscosity liquids.
Measurement range 240-1200cSt of liquid kinematic viscosity was determined by capillary method. Based on the known viscosity standard solution, the comparison outflow time was calculated.
Made of stainless steel, with a flow hole diaMeter of 3.0 +/- 0.01mm and a viscosity range of 7-40mm ²/s, it is suitable for testing the outflow time of Newtonian or near-Newtonian liquids and meets ISO and GB standards.
Measurement range is 7~ 42cst. Viscosity is evaluated by recording liquid outflow time. It is suitable for Newtonian or near-Newtonian liquids to ensure measurement accuracy and comparability.
Made of stainless steel, the slurry diaMeter is 50mm, the Rod length is 300mm, and the medium and high speed stirring performance is excellent, which is suitable for efficient mixing of medium and low viscosity liquids.
