1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
High Accuracy Position Sensor, indentation accuracy of 0.01mm, the maximum can be measured 1.25mm thick plate, automatic zero after the test without cumulative error, with 10 times magnifying glass for easy observation.
Test accuracy is ensured by using 500g payload and carbide circular tool, built-in horizontal bubble, and 20 times Microscope can accurately measure the size of the Crowd, with a reading accuracy of 0.1mm.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
The pencil scratch method is used to test film Hardness, and the three-point contact design always guarantees a 45 ° angle, which meets the GB6379 standard and is suitable for film Hardness detection in laboratories and construction sites.
Colorimetric measurement using calcite method, Calcium Hardness Measurement range of 0.00~ 2.70 mg/L, providing 100 tests, compatible with a variety of Photometers.
Three-point contact design ensures 45 ° stability testing angle, equipped with 6B-6H pencil and 500g to 1000g adjustable load, manual push to achieve accurate film Hardness identification.
The three-point contact design ensures that the pencil and the test surface always maintain a 45 ° angle, the standard 6B-6H pencil covers the complete Hardness range, the mechanical structure is easy and reliable to operate, and it is suitable for a variety of coating hardness testing needs.
The three-point contact design ensures a 45-degree test angle and provides a 500/750/1000g three-speed load for rapid determination of coating Hardness and is suitable for laboratory and field environments.
Cedar device weight 1Kg +/- 5g, Cedar load 500 +/- 5g, reading accuracy 0.1mm, in line with international standards, easy and reliable operation.
Measurement accuracy +/- 1HD using digital filtering technology, support USB/RS-232 and Bluetooth Data output method, Operating temperature 0-50 ℃ and weight only 170 grams portable design.
Adopt 0.75mm tungsten carbide test head, provide 0-20N three-gear adjustable pressure, accurately detect coating Hardness by scratch method, suitable for different curved surfaces and durable structure.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
It adopts 45 ° fixed angle design, loads 1000g +/- 10g, and evaluates Hardness by scratching coatings with different Hardness pencils, which is easy to operate and accurate.
