Using electrochemistry principle to detect carbon monoxide, with a range of 0~ 1000ppm, with four Alarm modes and wireless data transmission functions, support temperature compensation algorithm and a variety of usage methods.
With manual and automatic temperature compensation function, concentration Measurement range 1 × 10 ^ ²~ 5 × 10 ^ mol/L, the fastest reaction time is less than 4 minutes, support pFe value and iron Ion concentration display.
Using electrochemistry principle to detect 0-100ppm sulfur dioxide, with 4G/WIFI wireless communication, IP66 Protection Rating, four Alarm modes and 12-55 hours battery life, support remote paraMeter configuration and temperature compensation algorithm.
Designed with flameproof and explosion-proof structure, Response Time is less than 30 seconds, accuracy +/- 3% FS, can detect 0-20ppm sulfur dioxide concentration, support 4-20mA and RS485 signal output, suitable for harsh industrial environments.
Pump suction sampling and infrared Sensor technology, range 0~ 2000ppm, resolution 1ppm, Response Time ≤ 20s, with IP65 Protection Rating and Dust Filter, adapt to harsh environment.
Gas Sleeve Heating mode is used to heat up quickly and evenly, Temperature Fluctuation +/- 0.5 ℃, carbon dioxide concentration recovery time is short, double door design sealing is good for easy observation, Humidity evaporates naturally.
Can simultaneously detect 4 kinds of gases, integrated temperature Humidity detection, support diffusion and pump sampling, with Internet of Things remote monitoring function, Response Time T90 ≤ national standard, Protection Rating IP66, Operating temperature -40~ 55 ℃.
Using infrared NDIR detection principle, Response Time ≤ 30 seconds, detection error ≤ +/- 3% F. S, support 4-20mA, RS485 and switch output, with explosion-proof structure and remote alarm function, Sensor life up to 5 years.
8Mm thick PVC reinforced rigid plastic plate box, sulfur dioxide concentration adjustment range of 600~ 10000ppm, equipped with corrosion-resistant silicone airway and alkali solution exhaust gas treatment system, temperature control accuracy +/- 0.5 ℃.
Maximum support for simultaneous detection of 4 gases, integrated temperature and Humidity detection, compatible with pumping and diffusion Sampling method, Response Time T90 ≤ national standard, detection accuracy ≤ +/- 3% FS, with Internet of Things remote monitoring and a variety of Installation methods.
Using 32-bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition screen, support multi-Sensor and a variety of signal output, with explosion-proof and anti-corrosion design, Response Time ≤ 20s, detection accuracy ≤ +/- 2%.
Using infrared NDIR detection principle, range 0-500ppm, accuracy ≤ +/- 1% F. S, Response Time ≤ 30 seconds, support 4-20mA, RS485 and wireless signal output, with explosion-proof structure and remote monitoring capability.
Pump suction sampling and dust design, equipped with dust Filter, Response Time T90 ≤ 20s, detection accuracy ≤ +/- 1%, suitable for harsh industrial environment.
32-Bit microprocessor and 24-bit ADC chip, support 1-6 Sensor expansion, with 4-20mA, RS485 and other output modes, Protection Rating IP65, Response Time T90 ≤ 20s, accuracy ≤ +/- 2%.
Using 32-bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition screen, supports 1-6 Sensors and a variety of output modes, with automatic recovery and explosion-proof and anti-corrosion functions, Response Time ≤ 20s, detection accuracy ≤ +/- 1%.
