The XY axis displacement platform and the lifting measurement platform are used to facilitate accurate fine-tuning and measurement of small samples such as O-rings; the servo system imported from Japan ensures accurate positioning, and the built-in micro printer supports data output.
Using platinum temperature sensor and digital Optical inspection technology, temperature control accuracy 0.1 ℃, can process 2 samples at the same time, with video recording playback function, support 0.1-10 ℃/min heating rate.
The black background counting cell is used with annular fluorescent lamp side-shot illumination, and the colony contrast ratio is clear; the counter capacity is 0-999, and the inclined design of the cell surface is easy to observe, which can reduce the labor intensity of the experimenters.
With an impact speed of 2.9m/s or 3.8m/s, it supports a variety of sample sizes, uses semi-automatic control to improve operation efficiency, and can display information in real time and print out the results.
The CMOS integrated circuit is used to ensure stable counting, and the 7W energy-saving ring lamp side-shot illumination makes the colony contrast clear. The counter capacity is 0-999 to meet the needs of conventional detection. The probe pen marking function is avoided, and the repeability count is performed.
Using platinum plate or ring method measurement, the range is 0~ 400mN/m, the minimum resolution is 0.1mN/m, the manual lifting and lowering points are fast and micro-adjusted, and the output data of RS232C interface is supported.
Measuring methods of platinum plate and platinum ring are supported, with resolution up to 0.01mN/m, equipped with fast fine-tuning manual lifting platform, and can display data in real time through RS232 interface.
Spreader accuracy +/- 0.003mm, Spreader thickness range 0.001~ 10mm adjustable, with Vacuum chuck and heating function, support bar and drawdown blade two coating methods to ensure Spreader uniformity and repRoducibility.
Measurement range 0~ 14pH, Operating temperature 0~ 80 ℃. High strength conical sensitive membrane can pierce semi-solid sample.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
Spreader speed 5-200mm/s adjustable, Spreader thickness range of 0.001-10mm, equipped with Vacuum chuck system to ensure the stability of the substrate, Touchscreen control to achieve accurate operation, improve film repRoducibility.
Spreader rate 5~ 180mm/s adjustable, heating temperature up to 200 ℃, equipped with vacuum adsorption system to ensure Spreader flat, reciprocating lame plating to achieve uniform film, improve experimental repRoducibility.
Using imported wire Rod accuracy of 1 μ m, Spreader rate 5~ 200mm/s adjustable, support scraper and wire Rod two Spreader mode, Heating Temperature Uniformity +/- 3 ℃, suitable for a variety of substrate Film thickness treatment.
Film speeds are adjustable from 1 to 150mm/s for A4 size charts. Equipped with replaceable Glass or perforated vacuum beds, compatible with standard block and spiral bar film applicators, Operating interface is simple and intuitive.
Spreader accuracy of +/- 0.003mm, thickness range of 0~ 10mm, coating speed 5~ 180mm/s, using stepless speed and Vacuum chuck design to ensure film repRoducibility and uniformity.
