Measurement range 0-100 ° SR, equipped with a special measuringflask to directly display the Freeness/Schopper-Riegler value, without conversion, the test water temperature is controlled at 20 +/- 0.5 ° C to ensure accurate and reliable detection results.
Measurement range 1~ 100 ° SR, sealing cone rising speed 100 +/- 10mm/s, Pulp suspension filtration rate was determined according to Schopper-Riegler method.
Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, suitable for all kinds of Pulp suspensions, can use raw materials economically and end the Refining process in time, simple and reliable operation.
Manual compression sealing vertebral body design, three-legged leveling mechanism to ensure sealing, Measurement range 0~ 100 ° SR, cone rising speed 100 +/- 10mm/s, overflow port discharge time 149 +/- 1s.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1s, using national standard design, can accurately detect Pulp suspension filtration rate.
Measurement range 0~ 100 ° SR, overflow discharge time 149 +/- 1 seconds, cone rising speed 100 +/- 10mm/s, used to detect Pulp suspension filtration rate, in line with ISO 5267-1 international standards.
Vertical design, motor and drying system separation, small vibration, low noise, high dehydrating efficiency, Rotation speed of 2800 rpm, dehydrating weight 0-500g, accurate timing, easy to use.
Manually pressing the sealing cone and adjusting the rising speed with the heavy hammer, the spring pre-tightening mechanism enhances the sealing performance, the Measurement range is 1~ 100 ° SR, and the discharge time of the overflow port is 149 +/- 1 second.
The equipment adopts the mechanical action of flying knife roller and bottom knife, which can handle 200-700g absolute dry slurry, the speed of flying knife roller is 500 +/- 10rpm, and supports heavy thallium pressure adjustment and automatic beating time control, so as to realize fiber refinement and beating degree. Precise regulation.
Measurement range 0-4mm, resolution 0.001mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², automatic reciprocating motion to complete thickness measurement.
Measurement range 0-4mm, contact pressure 100kPa, equipped with dial indicator mechanism, can achieve accurate thickness detection, suitable for a variety of sheet materials.
Measurement range 0~ 1000ml/min, pressure difference 0.1~ 2.0kpa, stainless steel end cap and pure copper valve anti-corrosion structure, built-in fixture to avoid rubber pad peeling, suitable for a variety of materials Air Permeability accurate test.
Measurement range 0~ 1000ml/min or 0~ 17µm/(Pa · s), test area 10.0 +/- 0.05cm ², differential pressure accuracy +/- 0.01kPa, clamp ring coaxiality less than 0.05mm, suitable for medium Air Permeability paper testing.
Measurement range 0~ 1000ml/min, test area pressure accuracy of +/- 0.01kPa, equipped with 10cm ² standard test area and 35.68mm clamping ring, support different duration test.
Measurement range 0~ 1000ml/min, test area 10cm ², test area pressure difference 1kPa, suitable for a variety of industrial paper ventilation performance detection.
