The use of Bath coating method, effective application width 500mm, mechanical speed 1.2m/min adjustable, external infrared heating temperature control 50-150 ℃, Air-Cooled system to ensure efficient cooling down and coil mass.
The DL Impact device is suitable for small space testing, dual coil technology ensures good Repeatability and accuracy, Measurement accuracy +/- 12HL, built-in Direction Sensor automatically compensates for measurement errors.
The integrated structure is compact and portable, and the dual-coil technology is used to ensure good Repeatability and Measurement accuracy. The built-in Direction Sensor automatically compensates for errors, and supports a variety of Hardness standard conversions.
Using split design, the probe and the host are connected by aviation plug, equipped with digital dual coil probe technology, Measurement accuracy can reach +/- 6HL, support a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function.
The C-type Impact device has a small impact force and is suitable for surface hardening and thin-walled component testing; dual coil technology ensures +/- 6HL typical accuracy; built-in directional Sensor automatically compensates for errors; supports 5 Hardness standard conversions.
Multi-coil structure design, protective layer thickness Measurement range 1-185mm, accuracy +/- 1mm, with four scanning modes and ultra-dense rib resolution, support one-hand grip operation.
Multi-coil structure design, protective layer thickness Measurement range 1-185mm, accuracy +/- 1mm, with four scanning modes and ultra-dense rib resolution, support one-hand grip operation.
Measurement accuracy up to +/- 6HL with digital dual coil probe technology, support for a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function, can be adapted to four different Impact devices to meet diverse measurement needs.
The equipment adopts the immersion coating method, the effective application width is 500mm, the mechanical speed is adjustable 1.2m/min, and it is equipped with Air-Cooled system and cross-cutting device to ensure efficient and uniform coil processing.
Split design with four Impact devices, digital dual coil probe technology to ensure +/- 6HL Measurement accuracy, automatic direction compensation to achieve 360 ° measurement, support a variety of Hardness standard automatic conversion, to meet different detection needs.
Split design can be matched with a variety of Impact devices, using digital dual coil probe technology, Measurement accuracy of +/- 6HL, support 360 ° automatic direction compensation, built-in a variety of Hardness standard automatic conversion, with statistical and QC two Measurement modes.
The application width is adjustable from 100-400mm, the thickness range is 0.005-3mm, the rubber roller is heated to 200 ° C, and the drying temperature reaches 200 ° C to realize the continuous roll-to-roll film.
Using slot-die coating method, application width ≤ 500mm, thickness range 10-250μm; equipped with automatic deviation correction and constant tension system, Oven temperature RT +~ 160 ℃, support segmented thermostatic, ensure Spreader accuracy +/- 3 microns.
Spreader thickness range of 10-250μm, Dry-Film accuracy of +/- 3 microns, equipped with automatic constant tension control and four Oven section thermostatic, ensure uniform and stable Spreader, Oven with waste heat recovery system energy saving about 30%.
Adjustable scraper Spreader mode, Spreader accuracy of +/- 0.02mm, equipped with air-cooled water-cooled double chill down system, Spreader rate of 5-25m/min, Heating Temperature range to 200 ℃ +/- 3 ℃.
