The minimum test aperture is 0.5mm, and the three Illuminants share a test hole. Three transmittance data of 550nm, 850nm and 940nm can be obtained for one hole. Real-time dynamic self-Adjustment, Test accuracy +/- 2%.
Optical inspection system with infinity, equipped with 4X-100X flat field color difference elimination objective lens and WF10X-16X large field of view eyepiece, providing NA1.25 condenser lens and 0.001mm fine-tuning accuracy, support phase contrast observation function, comfortable and convenient operation.
Using long working distance flat field color difference elimination objective lens and insert plate phase contrast condenser lens, working distance 30mm, support double-decked mechanical moving stage, adapt to a variety of culture dishes, easy to dynamic microscopic observation and comfortable operation.
Dual lens design can switch the viewing direction arbitrarily, equipped with 450,000 pixels and 70 ° field of view, deep tube with anti-corrosion and wear-resistant material, support for photography and video and built-in 8GB storage, battery life of 3-4 hours.
Equipped with infinity flat field color difference elimination objective lens and large field of view eyepiece to provide high-quality Optical Properties; using 3W LED cold Illuminant lighting and coaxial coarse fine-tuning system, the fine-tuning grid value reaches 0.001mm, and the operation is comfortable and accurate.
Using 60cpm Friction Frequency and 9N Friction Load, the specified number of times of friction can be carried out through the friction head of parcel white cotton cloth, and the sample dyeing Stability can be evaluated according to the gray card comparison.
Equipped with a long working distance flat-field color difference elimination objective lens and four sets of fluorescence filters, it supports phase contrast observation and fluorescence switching, and the fretting grid value is up to 2 μm, which is suitable for clear imagery of living cells and liquid samples.
Optical inspection system with infinity, equipped with 4X-100X flat-field color difference elimination objective lens and WF10X large-field eyepiece, providing 2 μm fretting grid value coaxial focusing system, double-decked mechanical stage moving range of 75 × 50mm.
Using 3-in-1 optical path design, one hole can simultaneously measure three wavelengths transmittance. Equipped with 1mm test aperture and Automatic calibration function, support 850nm/940nm infrared and 550nm visible light measurement, accuracy of +/- 2%.
The dual-station design can simultaneously carry out two sample tests, the friction speed is 30CPM, the friction hammer load is 200g, and it has the power-off memory function to support dry and wet friction and organic solvent friction test.
Using reciprocating friction method, friction load 9N, Frequency 60cpm, can be set 0~ 999900 times test, support drying wet white cotton cloth for dyeing fastness evaluation.
Illuminant continuous luminance adjustment, equipped with coaxial coarse fretting focusing mechanism, fine-tuning accuracy of 0.002mm, support 40X-1600X magnification range observation, lens barrel can rotate 360 degrees freely.
Measurement accuracy of +/- 5.0 + L/100μm with 20 million pixel high definition CCD and bilateral telecentric lens, supports automatic identification of multiple workpieces for simultaneous measurement without positioning fixture.
With transparent reflection lighting switching function, configure center adjustable non-stress objective lens and rotating stage, fretting grid value 2 μ m, table vertical Travel 30mm, support orthogonal and cone light observation.
Automatic image registration does not need to locate the workpiece, can identify multiple measurement pieces at the same time, repeability accuracy 0.001mm, Measurement accuracy +/- 5.0 + L/100μm, equipped with high definition 20 million pixel CCD and bilateral telecentric lens.
