The thickness range of Spreader is 0.01mm~ 2mm, the minimum gluing thickness is 0.01mm, the coating surface density ≤ +/- 1.5%, the dial Meter is used to fine-tune the gap and the Teflon baffle to adjust the width, and it supports forward and reverse continuously variable speed and automatic winding.
The equipment adopts High Accuracy modular Spreader station, Spreader thickness range 0.01mm~ 2mm, coating speed 2~ 4.5m/min adjustable, with UV instant curing and heating function, suitable for a variety of materials such as paper, film and so on.
High Accuracy modular Spreader station structure, Spreader thickness range of 0.01mm to 2mm, coating speed 2-4.5 m/min adjustable, support forward and reverse stepless variable speed and automatic winding, gap adjustment Graduation up to 0.001mm, easy to accurately control the Spreader process.
The formed process is used to form a continuous groove to control the wet film thickness, the wet film thickness is 5 μm, the application width is 250mm, and the workmanship is fine and the environmental protection Encasement.
Using formed process, wet film thickness 42 μ m, application width 250mm, easy to clean and continuous wire, effectively improve the uniformity and ease of operation of Spreader.
Spreader formed process to ensure uniform, can accurately control 80 micron wet film thickness, diaMeter 10mm with 304 stainless steel material to achieve durable and easy to clean, continuous wire design to improve operating efficiency.
Adopt High Accuracy modular Spreader station structure, all-electric control without external air source; Spreader thickness can reach a minimum of 0.01mm, accuracy +/- 0.003mm; equipped with UV LED curing module, instant curing; Spreader width 400mm, speed 2-4.5 m/min adjustable, forward and reverse stepless transmission.
The formed process ensures that the film is continuous, the wet film thickness is 7 μm with high accuracy, and the 304 stainless steel material is durable and easy to clean.
Using a formed pRoduction process to form a continuous groove, wet film thickness 5μm, diaMeter 10mm, not easy to clog and easy to clean, fine workmanship.
The cold extrusion process is used to form a continuous groove to control the wet film thickness, the wet film thickness is 5 μm, the material is 304 stainless steel, and the workmanship is fine and environmentally friendly. Encasement.
The equipment can perform continuous rotary drop test, drop height up to 1000mm, Test speed 5-20 times/min, suitable for Reliability verification of small electronic pRoducts.
Coating speed 1~ 10m/min adjustable, wet film thickness range of 0.005-3mm, drying temperature up to 200 ℃, using continuous experimental film design, equipped with adjustable Blade Coating device and automatic deviation correction function.
The continuous groove design prevents clogging by impurities, with a wet film thickness of 84.6 μm and a diaMeter of 6.35 mm, making it suitable for high-viscosity coatings and easy to clean and maintain.
Adopt High Accuracy modular Spreader station structure, all-electric control without external air source. The minimum thickness of Spreader can reach 0.01mm, the maximum Spreader width is 300mm, the Spreader speed is adjustable 2-4.5 m/min, and it has an electronically controlled precision tension system to adapt to different materials such as paper and plastic film.
The formed process is used to ensure unbroken wire and easy to clean, the 7 μm wet film thickness is precisely controlled, the 60mm application width is suitable for small area applications, and the 304 stainless steel material is durable.
