Adopt scraping method, equipped with 1 Meter Oven and UV light curing system, curing area 600 * 500mm, main peak wavelength 365nm, pRoduction speed 0-5m/min, with tension control unwinding to ensure uniform and stable Spreader.
PRoduction speed 0-5m/min, effective application width ≤ 300mm, using scraping with UV light curing, drying tunnel length of 1 Meter, with tension control unwinding and Touchscreen operation.
LED Cold Illuminant Technology, No Infrared Radiation, Suitable for Heat Sensitive Materials; Power density 400-2400mw/cm ², curing area 500x400mm.
Special design container to ensure measurement conformity, suitable for color scheme, suitable for fine powder particle measurement, effectively avoid the influence of powder tightness and surface Smoothness.
Effective application width up to 500mm, UV curing length 1000mm, using Touchscreen control, support 0-5m/min pRoduction speed, with tension control unwinding and adjustable UV UV light intensity 1-30mw/cm ² to ensure uniform curing.
With lame plating and scraping dual functions, coating speed 0-5m/min adjustable, equipped with UV light curing system, curing area 300 * 1000mm, support automatic tension control and deviation correction function.
Using 395nm wavelength LED Illuminant, Light intensity 0-100% adjustable, equipped with Water-Cooled system to ensure stable operation, support 10-50mm irradiation distance, maximum conveying speed of 6 m/min, suitable for fine curing process.
Application width up to 400mm, pRoduction speed 0-5m/min adjustable, UV light curing area 400 * 1000mm, main peak wavelength 365nm, equipped with tension control unwinding and Touchscreen Operating interface to achieve stable Spreader and rapid curing.
Using photothermal method to achieve non-destructive measurement, Measurement range 0-300μm, accuracy +/- 3%, can be measured in any shape of the sample including the frame and edge.
Using 395nm wavelength LED Illuminant, Optical Power up to 12W/cm ², equipped with Water-Cooled system to ensure stable operation, adjustable irradiation distance of 10-50mm, support 0-100% stepless dimming, suitable for a variety of material curing needs.
Equipped with 6 measurement channels and K-type Thermocouple, supports a wide temperature range of 0-1200 ° C, uses 3.5-inch full-color Touchscreen operation, built-in rechargeable battery can work continuously for 4 hours, storage capacity up to 250,000 measurement points.
Using 405nm wavelength and 0.8W/cm ² optical power density, UVLED output is concentrated, the photoelectric conversion rate is high, and the curing speed is fast; the cold light source has low heat radiation, avoids thermal stress deformation, and is suitable for thermal materials.
With bar and adjustable drawdown blade two coating methods, Spreader thickness range 0.01~ 10mm, accuracy of +/- 0.003mm, integrated ultraviolet curing and automatic feeding system, support stepless variable speed and custom coating speed.
Can test flowability, Angle of Peace and Loose Bulk Density, equipped with 30ml stainless steel measuringflask and double powder plate, funnel diaMeter can be selected 5mm or 2.5mm, for precise control of powder mass.
Adopt bar and adjustable drawdown blade double coating method, Spreader accuracy +/- 0.003mm, thickness range 0.001~ 10mm adjustable, support UV light curing, lamp board height 20mm can be customized.
