The device uses micro-processing technology and high Reliability integrated circuit, with data nonlinear processing and smoothing function, fast automatic multi-point correction, Measurement range 0~ 0.5mg/L, resolution 0.001mg/L, to ensure long-term stable work.
Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
Measurement range 0-300 μg/L, accuracy +/- 10 μg/L +/- 3% with LED@527nm Illuminant and Silicon Light Detector, built-in Reaction Timer ensures conformity of results and IP67 waterproofing.
Manganese ion measurement range of 0.0~ 20.0ppm, accuracy of +/- 0.2ppm +/- 5%, using LED@525nm Illuminant and potassium periodate method, easy to operate and suitable for rapid detection in the field.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
Imported high-performance long-life Illuminant and narrowband filter system, Optical inspection stability, high accuracy; measurement range 0.02~ 5.00mg/L, Indication Error ≤ +/- 5%, support long-term data preservation and user self-calibration Linear dispersion.
Sharp probe measurement without leaving marks, measurement range 6%~ 90%, support wood moisture content and wood humidity equivalent value display, equipped with extended Probe and hammer ElectRode for different depth measurement.
Measurement unit with Baume degree, sugar content accuracy +/- 0.1 ° Baumé, automatic temperature compensation, 1.5 seconds fast display results, only 2 drops of sample, waterproof design for a variety of environments.
Using computer technology to ensure accurate measurement, the measurement range is 0~ 50%, the resolution is 0.1%, and the moisture content and Ambient Temperature can be measured at the same time.
4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
The thermal weight loss method is used to measure carbon black content, the operating temperature can reach 990 ° C, and the 7-inch Touchscreen is equipped to realize one-button calculation, support segmented paraMeter setting, and the Furnace body separation design has better heat dissipation.
The fat content was determined by Soxhlet extraction principle, the measurement range was 0.5% -60%, and two samples could be processed at the same time.
The imported cold light source has a lifespan of 100,000 hours, a detection limit of 0.04mg/L, and supports 4000 groups of continuous Measurement mode and data storage. The operation of the digestion Colorimetric integrated tube is safe and convenient.
It can measure refractive index 1.3000~ 1.7000nD and sugar content 0~ 100% Brix, with accuracy of +/- 0.0002nD and +/- 0.1% Brix, respectively, and supports temperature correction and direct data printout.
Using electromagnetic wave scanning technology, high frequency scanning depth 50mm, Measurement range 0-99.9%, Response Time 1 second, no contact can be measured without damage to the internal moisture content of the object.
