Four-in-One Gas Analyzer

The four-in-one gas detector simultaneously measures the concentrations of multiple gases using electrochemical sensors, catalytic combustion sensors, infrared sensors, and photoionization sensors. The instrument converts gas concentrations into electrical signals and displays the readings, making it suitable for environmental monitoring in factories, safety inspections in confined spaces, and leak warnings.
Selection
When selecting, ensure that the gas types to be detected match the sensor type. Check whether the measuring range and resolution meet the on-site concentration requirements. Verify that the protection rating is suitable for the operating environment. Confirm that the alarm methods and data recording functions meet management needs. Also, verify the calibration cycle and maintenance costs.

Terms

Standards

Instruments

Imported electrochemistry/catalytic combustion Sensor, Fast Response and High Measurement accuracy. Built-in 4000mAh large-capacity battery, equipped with 2.4 inch high definition color screen, support Data storage and export, with two-level sound and light alarm function.

$ 541.00

Imported Electrochemical sensor, Response Time ≤ 20s, detection accuracy ≤ +/- 3%, built-in strong air pump can work in micro negative pressure environment, with Data storage and Temperature Humidity detection function, adapt to various harsh occasions.

$ 811.00

Adopt drawdown Bar & Blade heating Vacuum chuck four-in-one function, coating speed 5~ 200mm/s adjustable, Spreader thickness range 0.001~ 10mm, equipped with automatic feeding system and Vacuum chuck fixed to ensure uniform and stable film.

$ 7335.00

Using electrochemistry and catalytic combustion Sensor to detect EX/O2/CO/H2S four gases, Response Time is less than 30 seconds, with waterproof ABS shell and sound and light vibration triple alarm, battery life of 8 hours.

$ 159.00

Adopting drawdown Bar & Blade heating Vacuum chuck four-in-one design, Spreader accuracy is up to +/- 0.005mm, and the rate is adjustable from 5 to 180mm/s. Spreader is uniform and stable by controlling speed and pressure.

$ 6205.00

Can simultaneously detect four gases, Electrochemical sensor, Response Time instant, alarm sound up to 80 decibels, operation temperature range -10~ 50 ℃, portable design weighs only 360 grams.

$ 241.00

Supports simultaneous detection of four gases and temperature Humidity, adopts dual temperature Humidity compensation design, has zero point automatic correction function, Protection Rating up to IP66, Operating temperature range -40~ 55 ℃.

$ 301.00

Modular electromagnetic force equilibrating Sensor, Weighing speed adjustable and Stabilization time ≤ 5 seconds, with four shock and RS232 interface, support two-way communication and a variety of mass unit conversion.

$ 627.00

With four-in-one measurement function, accuracy of 0.5% F. S, support automatic temperature compensation and 1-5 point calibrating, built-in 1000 data storage, 7-inch large screen display is clear.

$ 556.00

ABS + PC shell is sturdy and durable, equipped with 2.0 inch 320 * 240 resolution display screen, supports methane, O2, H2S, CO four Gas detection, Response Time is the fastest 20 seconds, battery life is 8 hours, with sound and light vibration triple Alarm mode.

$ 344.00

With four-in-one function, Spreader accuracy of +/- 0.003mm, Film thickness range of 0~ 10mm, speed of 5~ 180mm/s, using vacuum adsorption and heating system to ensure uniform and stable Spreader.

$ 7496.00

The three-in-one optical path measures the transmittance of three wavelengths at one time, the test aperture is 1mm to adapt to small-sized materials, and the parallel light design ensures stable measurement of thick materials, with an accuracy of +/- 2% and a resolution of 0.1%.

$ 361.00

Detachable built-in Probe design, support one-handed operation, Measurement range 0~ 1500μm, accuracy +/- 1%, suitable for a variety of PosiTector host models

$ 1224.00

The three-in-one optical path design can simultaneously measure four sets of data, the test aperture of 1.3mm supports small-size material detection, with Automatic calibration and large-capacity storage functions. Measurement accuracy of +/- 2% ensures stable and reliable results.

$ 361.00

Detachable built-in Probe design, support one-handed operation, Measurement range 0~ 1500μm, accuracy +/- 1%, suitable for a variety of PosiTector host models.

$ 811.00

Articles