Adopt air condensation technology instead of water condensation, Temperature control accuracy +/- 2 ℃, equipped with 12 heating holes, heating up to 170 ℃ time is less than 30 minutes, support segmented timing function.
Double-decked serpentine coil condensation design, chilled down area of 0.15m ², maximum evaporation capacity of 22ml/min, with automatic lifting function and anti-dry burn Safety protection, to ensure efficient and safe Sample Handling.
Pure oil-free design ensures clean gas, exhaust volume of 1500L/min, automatic start and stop to reduce energy consumption, pressure dew point 2-10 ℃, suitable for a variety of industry needs.
Adopt pure oil-free design to ensure clean gas, dew point range -40~ -60 ℃, exhaust volume 600L/min, automatic start and stop to reduce energy consumption, no need for special personnel on duty and easy maintenance.
Adsorption drying technology can reduce the dewpoint temperature to -20 ° C, Flow rate loss control within 10%, effectively prevent the condensation of oil and gas mixtures in the gas storage Tank, and ensure the lubrication effect of the equipment.
The principle of thermal radiation is used to keep the liquid temperature below the boiling point and avoid water droplets in the gas. The double condensation cycle design improves the extraction effect of pure water, and the output of pure water reaches 800-1000ml/hour. No heavy metals are detected by flameless atomic absorption analysis.
The principle of thermal radiation is used to keep the liquid phase temperature below the boiling point, avoid boiling water droplets, and complete gas-liquid separation; the double condensation cycle design improves the extraction efficiency of pure water, the output of pure water reaches 400-500ml/hour, and the Heating power is 800-1000W to ensure that no heavy metals are detected.
The integrated adsorption structure is used with a silent oil-free air Compressor, which can reduce the dewpoint temperature by 20~ 40 ° C, has the function of drying and sterilization, and the water outlet effect is stable and reliable.
Adopt -80 ° C cold trap temperature and ≤ 5Pa Vacuum Level, with sample pre-freezing function and color Touchscreen operation, support data export and remote control, built-in maintenance reminders and one-click defrosting.
Cold trap temperature up to -70 ℃, Ultimate vacuum degree ≤ 2Pa, equipped with 7-inch Touchscreen display operating paraMeters, support data export and remote control functions, with one-button defrosting and vacuum alarm system.
With cold trap temperature ≤ -80 ℃ and water capture 4kg/batch, using silicone oil heating technology, support sample pre-freezing and one-button defrosting function, color Touchscreen operation is simple, data can be exported and saved.
Using silicone oil heating technology, the cold trap temperature can reach -80 ℃, Ultimate vacuum degree ≤ 2Pa, with sample pre-freezing function and color Touchscreen operation, support a variety of container freeze-drying needs.
Using silicone oil heating technology, the cold trap temperature can reach -80 ° C, Ultimate vacuum degree ≤ 2Pa, equipped with 7-inch Touchscreen and pre-freezing function, support data export and remote control, suitable for a variety of container lyophilization needs.
Danfoss Compressor to achieve -60 ℃ low temperature, water capture up to 4kg/batch. With cold trap pre-freezing function without additional equipment, color Touchscreen display operating paraMeters, support data export and remote control.
Aluminum block Bathroom heat transfer uniformity, temperature control accuracy of +/- 0.5 ℃, 36 holes independent air needle channel can avoid cross-contamination, lifting stroke 200mm easy to operate, gas flow 0-15L/min adjustable.
