Colorimetric integrated tube design, no liquid transfer, measurement error ≤ +/- 5%, Repeatability ≤ +/- 5%, support more than 10 measurements to take the average, built-in 30,000 data storage and thermal printer.
Adopting imported cold light source technology, the lifespan is up to 100,000 hours; the detection sensitivity is as high as 0.001mg/L; the Colorimetric integrated tube design is supported, and the operation is safe and convenient; the built-in rechargeable battery lasts for a long time.
The principle of thermal radiation is used to keep the liquid temperature below the boiling point and avoid water droplets in the gas. The double condensation cycle design improves the extraction effect of pure water, and the output of pure water reaches 800-1000ml/hour. No heavy metals are detected by flameless atomic absorption analysis.
Heavy-duty stainless steel structure ensures stable support, equipped with 3 strong magnets for firm adsorption, maintaining the vertical state of Microscope, suitable for various metal surface fixing needs.
Using 15.8mm diaMeter steel bar and 9.1kg/10kg weight, the Impact height is adjustable at 610mm or 1000mm, and the battery deformation and safety risk are evaluated by simulating the impact of heavy objects.
Impact height of 1250mm, support 300g and 1000g drop weight mass, equipped with Φ 12.7mm and Φ 15.9mm punch, can pass/fail and grading test, suitable for a variety of material testing.
Impact height 0-100cm adjustable, Graduation 1cm; equipped with a variety of hammer mass such as 1000g and punch diaMeter such as Φ 12.7mm, support accurate deformation testing, suitable for coating impact resistance evaluation.
Using 2000g heavy hammer and 16mm punch, Impact depth 2.5mm, no secondary rebound phenomenon, to ensure accurate and reliable test results.
Impact energy up to 90Num, Impact device mass 250g, can measure surface roughness up to 30μm large heavy specimen, ball head using tungsten carbide material Hardness up to 1600HV.
The instrument is designed with a heavy hammer structure, with a weight mass of 6600g +/- 33g, which is suitable for the bending performance test of reflective film. It is simple to operate and safe and reliable to measure, and meets the requirements of national standards.
The large sink design is used to reduce buoyancy error, the density accuracy is 0.001g/cm ³, and the Brazilian fire gold with coating thickness > 30μm can be tested, and the mixing ratio of various precious metals can be measured.
Measurement of nonmagnetic coatings on ferrous metals, thickness range 0-6000μm, accuracy +/- 3%, built-in Probe single-handed operation, Protection Rating IP65, 60 + readings per minute.
Impact energy up to 90mJ, can detect materials with a maximum Hardness of 650HB, designed for large and heavy castings, can adapt to workpieces with a surface roughness of 6.3μm, and a minimum test thickness of 10mm.
Using imported cold light source, Optical inspection Stability up to +/- 0.001A/20min, life 100,000 hours; Colorimetric digestion integrated tube design, support a variety of heavy metals detection, minimum detection value of 0.001mg/L.
The principle of thermal radiation is used to keep the liquid phase temperature below the boiling point, avoid boiling water droplets, and achieve complete gas-liquid separation; the output of pure water is 800-1000ml/hour, and the Heating power is 1500-2000W to ensure that no heavy metals are detected.
