32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.
Double-sided horizontal mounting design can accommodate 40 centrifuge tubes simultaneously, compatible with 1.5ml and 2.0ml specifications, suitable for swirl/spin Mixer for efficient Sample Handling.
Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.
Adopt horizontal three-roller extrusion grinding, roller clearance hand adjustment, maximum processing viscosity 3000000cps, roller can be cooled down water temperature control, fineness control precision, suitable for a variety of viscosity materials.
Using the rotary oscillation mode, Oscillation Frequency up to 3000 rpm, swing amplitude of 5mm, through smooth contact to achieve rapid mixing, speed can be adjusted with pressure, suitable for a variety of laboratory applications.
Using stepless speed regulation technology, Speed range 0~ 2800rpm, turnover diaMeter 4mm, support point and continuous Operating Mode, high performance motor to ensure rapid mixing and low noise.
Rotation speed 2500rpm, can handle 2000ml volume sample, integrated magnetic stirring, vortex mixing and microplate oscillation multi-function.
With magnetic stirring function, the maximum stirring capacity of 2000ml, Speed range 200-2500rpm, vibration range 4.5mm, support point and continuous operation mode switching.
Complete 64 Sample Handling in 1 minute, use vertical oscillation to ensure Stability, noise is lower than 55dB, support dry grinding, wet grinding and low temperature grinding, suitable for a variety of specifications grinding tube.
Rotation speed 86rpm, disc diaMeter 240mm, weight of about 7.32kg four pieces of adjustable pressure, double transmission to ensure that the number of revolutions is accurate, concave socket design for easy replacement of grinding, strong anti-interference and foot shock absorption anti-skid.
Complete 48 Sample Handling within 1 minute, adopt fully enclosed design to avoid cross-contamination, support 0-70Hz homogenization speed and low temperature grinding mode, and the noise is lower than 55dB to ensure a quiet experimental environment.
The surface of the three rollers is squeezed and rubbed at different speeds to achieve grinding. The roller is made of cold hard alloy steel, with a surface Hardness of HS70 ° or more, a fineness of grinding up to 15μm, and a capacity of 350Kg/h.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
With point and continuous operation mode, Speed range 200-2500rpm, reinforced engineering plastics and TPU work surface, acid and alkali wear resistance, support magnetic stirring and microplate adaptation.
The DC motor is not easy to heat up and can run for a long time, the speed range is 100~ 2800rpm, with two operation modes of light induction and continuous, and supports 1~ 99h59m59s timing function.
