Adopt circular embossing method to improve the fit, the proofing speed is adjustable from 0-300rpm, equipped with High Accuracy Servo Motor and quick replacement anilox roller system, support a variety of gray scale customization.
With five Illuminant system, Color temperature coverage 2700K to 6500K, no need to warm up without flashing, automatic switching Illuminant and display the use time, low energy consumption without heating, support Metamerism function.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Adopt servo electric printing pressure system, printing pressure 0-4mm automatic adjustment, printing speed 0-100 Meters can be set, support low accuracy overprint, simulate Gravure Printing drawdown blade Installation method, easy to detect inks.
Equipped with five Illuminant system, supports D65, TL84 and other Standard light sources, the interior is coated with Moncel gray N5.5, the width is 60cm, and the multi-point Illuminant observation system enhances the accuracy of color evaluation.
Using electric pressure system, the printing pressure is adjustable from 0 to 2mm, the speed range is 0 to 80 Meters, low accuracy overprinting is supported, and the computer program control operation is stable.
Using 160 line metal anilox roller and rubber roller combination, print width 70mm, suitable for inks proofing, wet film thickness and the number of lines inversely proportional, proofing authenticity and easy to operate.
Pressure adjustable range -1 to + 1mm, proofing speed support 400-700rpm three-speed frequency conversion speed regulation, uniform ink time 15-800 seconds adjustable, fixed structure to ensure proofing Stability.
The printing speed is 0~ 260m/min, the accuracy is less than 0.5, which supports data management and characteristic detection, and can reduce the number of proofing and material waste.
Ceramic roller structure, line number standard 600LPI can be customized 70-1200 lines, BCM range 1.6-5; drawdown blade, ceramic roller and other components can be individually adjusted left and right pressure, proofing speed 0-80 m/min adjustable, support material thickness 0.01-2 mm.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
The multi-stage color development structure can simultaneously print 4 color strips of different thicknesses or Hue, and the uniform ink speed can be adjusted by 500-800rpm in three gears. With the Basis Weight instrument, the ink layer thickness is precisely controlled, and the operation is simple and durable.
Driven by numerical control motor, swirl/spin accuracy of 0.1 degrees, support multi-color inks Hue, concentration detection, can anticipate dry and wet ink color change and Abrasion Resistance, 5-10 minutes rapid color development, significantly reduce inks waste.
Using 300-line quadrilateral pyramid-shaped mesh hole stainless steel anilox roller, the print width is 70mm, the wet film thickness is inversely proportional to the number of lines, and accurate Spreader is realized through handle operation.
Using 180LPI metal anilox roller with 70mm print width, four pyramidal net hole structure to ensure the ink transfer evenly, the handle design in line with ergonomic operation labor-saving.
