Integrated Incubator and Shaker functions, Oscillation Frequency 40~ 300rpm, Temperature range RT + 5~ 65 ℃, 304 stainless steel liner and microcomputer PID control, with UV sterilization and automatic storage setting paraMeters.
Integrated Incubator and Shaker functions, small footprint and large bottle load; Temperature range 4~ 65 ℃, Temperature Fluctuation +/- 0.2 ℃; 304 stainless steel liner for easy cleaning, quiet operation and support multi-stage programming.
Integrated Incubator and Shaker functions, small footprint and large bottle capacity; Microcomputer PID control temperature and Oscillation Frequency, Temperature Fluctuation +/- 0.2 ℃; 304 stainless steel liner is easy to clean, supports multi-stage programming and UV sterilization to ensure safe and efficient operation.
Equipped with 254nm and 365nm dual-wavelength ultraviolet light sources, it supports thin-layer analysis and paper-layer analysis, can identify fluorescent substances, and is equipped with a 200 * 50mm filter.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
With a capacity of 2.5 liters, it adopts a single-layer structure design and is suitable for a variety of Power Dispersers to ensure efficient and stable material handling and easy operation.
Set thermostatic foster and oscillation function in one, microcomputer control temperature accuracy of +/- 0.5 ℃, Oscillation Frequency single layer 40-260 rpm, with slow start splash-proof design, stainless steel liner for easy cleaning.
Dual duct forced convection design makes Temperature Uniformity up to +/- 1.0 ℃, Fluctuation +/- 0.5 ℃; Speed control fan supports lightweight Sample Handling, low water level alarm and forced cooling structure to improve safety, support 0~ 9999 minutes timing.
Using metal layer plate structure, Temperature range -7~ 70 ℃, support 13 point temperature measurement, can simultaneously Spreader 6 samples, through drying air flow and layer temperature to achieve accurate film formation detection.
With a two-way temperature control system, the temperature can be raised to 50 ° C in -5 ° C environment, and the temperature can be cooled to 5 ° C in 32 ° C environment; the rotary oscillation mode is adopted, and the frequency range is started to 300rpm.
Temperature control accuracy of +/- 1 ℃, the speed range starts to 300rpm, with double oscillation mode of rotary and reciprocating, multi-functional spring bottle rack supports a variety of comparison experiments, safe and simple operation.
Temperature control accuracy of 0.1 ℃, Temperature Fluctuation +/- 0.5 ℃, with oxygen holes to ensure that the foster environment is fully supplied with oxygen, spring bottle rack to support a variety of comparative experiments, stepless speed range start to 260rpm.
Dual duct forced convection design to ensure Temperature Uniformity +/- 1.0 ℃, Fluctuation +/- 0.5 ℃, speed control fan to adapt to lightweight samples, support 0~ 9999 minutes timing operation, with over-rise prevention and low water level alarm and other safety features.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Using three eccentric axis equilibrate drive to ensure uniform sample oscillation, Speed range 40~ 300rpm, swing amplitude 35mm, can run continuously for a long time, Rotation speed monitoring and mild start function.
