The equipment range 0~ 30% vol, resolution 0.1%, support three alarm and temperature measurement, high-brightness backlight for low-light environment use, can set the lock machine password to enhance security.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted without complex installation and is suitable for temperature monitoring of a variety of electrical equipment.
Adopt photometric 90 ° scattering measurement method, equipped with automatic cleaning brush and bubble measurement cell, support automatic sewage discharge and cleaning interval setting, Measurement range 0.00-500 NTU, Repeatability ≤ 2%.
The rated temperature is 55 ° C and the error is only +/- 1 ° C. The melting situation can be observed remotely, and it can be directly pasted for use in busbars or equipment terminals to monitor temperature changes.
Adopting three-color reversible discoloration technology, when the temperature reaches 65 ° C, it changes from white to red, and after cooling, it turns to black to record historical overtemperature. The size of 25 * 40mm is easy to paste and install, and can be used repeatedly to monitor temperature changes.
Explosion-proof enclosure design ensures stable operation in harsh environments, can simultaneously monitor multiple particle size dust concentration without changing the cutter, Measurement range 0.01-100 mg/m ³, built-in protective gas curtain to prevent Optical inspection system contamination.
Adopt D-type Impact device and optional Miscellaneous six Impact devices, automatic identification and replacement without calibrating; can store 600 sets of measurement data, support seven Hardness standards automatic conversion, Measurement range covers 30~ 110HS to 80~ 976HV.
Scanning range 0-6000mm, 100 independent flaw detection channels, support Automatic calibration and defect echo positioning, with high-brightness color display and three-proof design, adapt to various complex working environments.
Adopt lever handwheel to mechanically control the rotation of the peep head in both directions, accurate and flexible operation; equipped with 5-inch high definition display screen and high luminance LED lighting, multi-level adjustable luminance; built-in 8GB memory and lithium battery, can work for 3-4 hours.
The device features an infinity distance Brightfield metallographic objective for long working distance measurements, high luminance LED or halogen lighting options, and supports 12 million pixel high definition CCD imagery.
Dual lens design can switch the viewing direction arbitrarily, equipped with 450,000 pixels and 70 ° field of view, deep tube with anti-corrosion and wear-resistant material, support for photography and video and built-in 8GB storage, battery life of 3-4 hours.
Using 3.5mm Probe and 10mm insertion depth, Measurement range 0.5~ 15.0kgf/cm ², with average calculation, MAX Maximum latch function, support USB, RS-232 and Bluetooth Data output methods.
Real-time monitoring of sample temperature, temperature range 0 ℃~ 100 ℃, accuracy +/- 1.0 ℃, can be used with a variety of Viscometers.
With pH, conductivity, TDS and temperature Multi-ParaMeter measurement, pH range 0.0-14, EC range 0-3999 μS/cm, supports Automatic calibration and continuous monitoring, waterproof design and large screen display for easy operation.
Supports 24-hour continuous monitoring of acidity and temperature, Measurement accuracy +/- 0.2pH, resolution 0.1pH, Manual calibration method, suitable for rapid measurement of multiple batches of samples.
